TR Forums

LoCoJoMo · Wed Apr 10, 2002 1:08 pm

i d/l some cpu temperature sofware...its probably not worth a damn...but it said something about core=+2.50V....and it was red...is that bad or something.....but also it was in red....i dont think thats good....should i worry and whats a better temperature reading program...that everyone uses...even the "overclockers"....what do you all use???????

LoCoJoMo · Wed Apr 10, 2002 1:09 pm

didnt mean to say it said it was red 2 times...typo

tanker27 · Wed Apr 10, 2002 1:13 pm

what Kind of CPU is it? What was the name of the software. It might have been wrong and then again it might have been right. Those marks sometimes fluctuate depending on what your PC is doing. Remember most of the time they are a "snapshot of a certain moment"

LoCoJoMo · Wed Apr 10, 2002 1:19 pm

its a p4 1.4ghz..retail fans,retail grease,no case fans,retail fan on graphics card....the program is Hardware sensor monitor 4.0....and my system was idle when i run the test...and i have check it about 20 times and it shows its min and max....and it hasnt gotten any lower than 2.50v in an hour...but the mainboard and cpu is running around 29C....

tanker27 · Wed Apr 10, 2002 3:17 pm

From what I can gater from Intels site that is high. see:

ftp://download.intel.com/design/Pentium ... 988703.pdf

But the temp seems normal.

Hope this helps

LoCoJoMo · Thu Apr 11, 2002 2:25 am

whats a better program or as i should say whats the program that alot of people use for temperature readings.......

lenzenm · Thu Apr 11, 2002 1:09 pm

Motherboard Monitor (or MBM for short) seems to be the most popular temp and voltage monitoring application for the x86 platform. Read more about it here: http://mbm.livewiredev.com/ If you like it, the download links are on the left.

TR Forums

Am I running hot!!!!????????

Am I running hot!!!!????????

Motherboard Monitor

Who is online