Impact of Vishera Undervolting

Discussion of all forms of processors, from AMD to Intel to VIA.

Moderators: Flying Fox, morphine

Impact of Vishera Undervolting

Postposted on Sun Jan 27, 2013 11:00 am

Hi, Gerbils. I've been tinkering with my month-old rig, trying to undervolt my CPU to see how much impact such a thing would have. My specs:

AMD FX-8350
MSI 990FXA-GD65
2 x 4GB G.Skill DDR3-1866
Powercolor HD7770 1GB
TP-Link TL-WN723N USB 2.0 Wifi Adapter
Hitachi 7K1000.C 1TB HDD
LG ODD
Cooler Master GX650 PSU
Windows 7 64-bit Ultimate
AMD Catalyst 13.1 + latest chipset drivers

In the BIOS there's an 'Auto' setting for the CPU voltage. I tested stability at the lower voltages using BurnInTest from Passmark and the lowest I could go without getting errors is 1.317v (at least that's what the BIOS says). I monitored voltages within Win7 using CPU-Z. At stock, the CPU voltage at idle is 0.920v, load at 1.4v. Set to 1.317 in the BIOS, CPU-Z reports idle voltage to be 0.864v, load volts at 1.28v. BurnInTest tests stability with all cores at 100%, so it's not gonna be pretty on my power bill. Tests run for 15 minutes. I did two runs, so that's 30 mins.

To test performance I haven't used any benchmarks, but rather, decided to find any perceived differences in actual gameplay between the 'Auto' voltage setting and 1.317v in the BIOS using UT2004. UT2004 generally runs very smoothly, and it's set to run at just 1280 x 1024, a resolution that I believe the HD7770 should be comfortable with. I specifically use the Osiris2 map because using diff. maps could make the test muddy; not all the maps are smooth. Osiris2 is somewhat between a silky smooth map and a difficult map; it's silky smooth but sometimes there are hiccups, specifically at 1.317v. I go around the map, no bots around, to see if there will be high latency frames, a 'hiccup', if you will.

What I found out is that at 1.317v, I seem to be having a hiccup or two than if the voltage is set to 'Auto'. At 'Auto', I can hardly see any hiccup, if at all. I know undervolting isn't supposed to impact performance at all. Plus, with the lower power consumption at 1.317v, Turbo Core should kick in more readily because there will supposedly be less heat. UT2004 is pretty much single threaded so it should invoke Turbo Core when it can and the benefits will be more useful than if a game is heavily threaded, I believe.

I'm not sure if something else is messing with UT2004 when CPU voltage is 1.317, but if true, they sure are a bunch of weird coincidences. I ran the map several times using stock voltage and 1.317. I don't know if this bit of testing on my part will prove to be useful to Vishera owners, or it's just me being too OC or something.

Any input would be appreciated. I think this deserves some investigation given how undervolting can benefit Vishera owners by decreasing power consumption especially at load.
AMD FX-8350 / Gigabyte 990FXA-UD3 (rev. 4) / 2 x G.Skill Ripjaws 4GB DDR3-1866 / AMD HD7770 1GB / TP-Link WN723N USB Wifi-N / Samsung 840 EVO 250GB / Hitachi 7K1000.C 1TB / LG ODD / Cooler Master GX650 / Aerocool VS3 / LG W2252TQ / Win7 64-bit
ronch
Gerbil Elite
 
Posts: 553
Joined: Mon Apr 06, 2009 6:55 am
Location: Down in the Bonehoard

Re: Impact of Vishera Undervolting

Postposted on Sun Jan 27, 2013 2:15 pm

Indeed, my gigabyte mobo used to run my AMD 955BE at about 1.40V in auto mode at stock speeds, well all the time since I disabled CnQ and C1E and all that jazz.

I undervolted it to 1.250V and it was stable 24hrs prime95, so that was good enough for me. Idle and load temps both dropped also.

I think I am going to try out one of those Richland APU's when they come out to upgrade the HTPC and reuse the HTPC parts for a PC for the garage.

I will post back when I have info on undervolting that chip.
Life doesn't change after marriage, it changes after children!
anotherengineer
Gerbil Elite
 
Posts: 503
Joined: Fri Sep 25, 2009 12:53 pm
Location: Timmins, ON Canada, Yes I know, Up in the sticks


Return to Processors

Who is online

Users browsing this forum: Google [Bot] and 4 guests