Page 1 of 1
Will the proc work?
Posted: Mon Dec 24, 2007 7:35 pm
by damian069
Im going to order a motherboard and get a penryn 45 nm processer with it. I was checking to see if the foxconn x38a supports it and on there website under drivers there is a download to make the 45 nm supported. So how would i get the penryn 45 nm to work if its the only one i have to install?
Posted: Mon Dec 24, 2007 8:28 pm
by Flying Fox
Why X38? Most (if not all) P35 boards should support the 45nm processors.
Posted: Mon Dec 24, 2007 8:37 pm
by Hance
Even the cheap P31 based motherboard I just got for my wife says 45nm processors will work with it.
Posted: Mon Dec 24, 2007 8:50 pm
by LicketySplit
It will probably work just fine. It may need a bios update but its not a big deal.
Posted: Mon Dec 24, 2007 9:04 pm
by damian069
ok thanks.