Is This the RAM for Me and My Motherboard?

Discuss the core components that make up the heart and soul of any good computer.

Moderators: Flying Fox, Thresher

Is This the RAM for Me and My Motherboard?

Postposted on Thu Jun 09, 2011 6:07 am

My sound-card should be arriving soon, maybe tomorrow. So the next upgrade will be from 2GB of RAM to 4GB.

Is this the best kind of RAM that I should get? If not, what would you suggest?

Thanks! :)
There has been multiple Fatal Errors in TheTechReportForums.ini

Utilize Alternatives (Y/N)?
>Y

FATALITIES!
The Lord of the Flies wins!
The Lord of the Flies
Gerbil Team Leader
 
Posts: 249
Joined: Fri Dec 24, 2004 5:34 pm

Re: Is This the RAM for Me and My Motherboard?

Postposted on Thu Jun 09, 2011 6:25 am

The modules from Adata, G.Skill and Kingston look great at $57.99, and yes, that's your RAM.
Canon 6D||[24-105/4L IS USM|100/2.8L Macro IS USM|70-300/4-5.6 IS USM|40/2.8 STM|50/1.4 USM|85/1.8 USM|Samyang/Bower 14/2.8 Full-Manual Rectilinear Wide-angle|
Canon EOS-M|11-22/4-5.6 IS STM|22/2 STM|EF-M 18-55/3.5-5.6 IS STM|
For sale!|24/2.8 IS USM
|
Airmantharp
Maximum Gerbil
 
Posts: 4694
Joined: Fri Oct 15, 2004 9:41 pm

Re: Is This the RAM for Me and My Motherboard?

Postposted on Thu Jun 09, 2011 7:24 am

Ah, thank you! I marked the three you mentioned and will get one of them later hehehehe
There has been multiple Fatal Errors in TheTechReportForums.ini

Utilize Alternatives (Y/N)?
>Y

FATALITIES!
The Lord of the Flies wins!
The Lord of the Flies
Gerbil Team Leader
 
Posts: 249
Joined: Fri Dec 24, 2004 5:34 pm

Re: Is This the RAM for Me and My Motherboard?

Postposted on Thu Jun 09, 2011 9:05 am

Try one of these.
2x2 GiB PC2-6400 (DDR2-800), CAS 5, 1.8 V

You might also see if someone who has recently upgraded to Sandy Bridge might sell or give you an old LGA 775 motherboard that has 4 DIMM slots instead of two.
i7-4770K, H70, Gryphon Z87, 16 GiB, R9-290, SSD, 2 HD, Blu-ray, SB ZX, TJ08-E, SS-660XP², 3007WFP+2001FP, RK-9000BR, MX518
JustAnEngineer
Gerbil God
Gold subscriber
 
 
Posts: 15128
Joined: Sat Jan 26, 2002 6:00 pm
Location: The Heart of Dixie

Re: Is This the RAM for Me and My Motherboard?

Postposted on Thu Jun 09, 2011 10:55 am

JustAnEngineer wrote:Try one of these.
2x2 GiB PC2-6400 (DDR2-800), CAS 5, 1.8 V

You might also see if someone who has recently upgraded to Sandy Bridge might sell or give you an old LGA 775 motherboard that has 4 DIMM slots instead of two.


You're doing it again :(.

The list you created contains the three I mentioned in the post above, which the OP readily found.
Canon 6D||[24-105/4L IS USM|100/2.8L Macro IS USM|70-300/4-5.6 IS USM|40/2.8 STM|50/1.4 USM|85/1.8 USM|Samyang/Bower 14/2.8 Full-Manual Rectilinear Wide-angle|
Canon EOS-M|11-22/4-5.6 IS STM|22/2 STM|EF-M 18-55/3.5-5.6 IS STM|
For sale!|24/2.8 IS USM
|
Airmantharp
Maximum Gerbil
 
Posts: 4694
Joined: Fri Oct 15, 2004 9:41 pm

Re: Is This the RAM for Me and My Motherboard?

Postposted on Thu Jun 09, 2011 11:22 am

1.8 V DIMMs are a better choice than ones that require extra voltage to run reliably at their claimed speed rating.

Lower latency modules are better than higher latency modules, all other factors being equal.

The OP's selection included six kits from Kingston and four kits from G.Skill.
i7-4770K, H70, Gryphon Z87, 16 GiB, R9-290, SSD, 2 HD, Blu-ray, SB ZX, TJ08-E, SS-660XP², 3007WFP+2001FP, RK-9000BR, MX518
JustAnEngineer
Gerbil God
Gold subscriber
 
 
Posts: 15128
Joined: Sat Jan 26, 2002 6:00 pm
Location: The Heart of Dixie

Re: Is This the RAM for Me and My Motherboard?

Postposted on Thu Jun 09, 2011 11:38 am

JustAnEngineer wrote:1.8 V DIMMs are a better choice than ones that require extra voltage to run reliably at their claimed speed rating.

Lower latency modules are better than higher latency modules, all other factors being equal.

The OP's selection included six kits from Kingston and four kits from G.Skill.


If you have an issue with me personally posting in this forum, please send me a PM so it can be discussed. This is your second post in this thread where you have refused acknowledge my posts and have repeated the same information, and I think you or any moderator on this forum would agree that such behavior causes confusion. Thanks!
Canon 6D||[24-105/4L IS USM|100/2.8L Macro IS USM|70-300/4-5.6 IS USM|40/2.8 STM|50/1.4 USM|85/1.8 USM|Samyang/Bower 14/2.8 Full-Manual Rectilinear Wide-angle|
Canon EOS-M|11-22/4-5.6 IS STM|22/2 STM|EF-M 18-55/3.5-5.6 IS STM|
For sale!|24/2.8 IS USM
|
Airmantharp
Maximum Gerbil
 
Posts: 4694
Joined: Fri Oct 15, 2004 9:41 pm

Re: Is This the RAM for Me and My Motherboard?

Postposted on Thu Jun 09, 2011 11:53 am

Airmantharp:

JAE was well within forum rules in his posts. If you have further issues, please PM me.

Thanks for listening.
There are people that embrace the Oxford comma and people who don't. Never get between these people when drink has been taken. I use the Oxford comma and always will. The rest can sod off.
Captain Ned
Global Moderator
Gold subscriber
 
 
Posts: 19736
Joined: Wed Jan 16, 2002 6:00 pm
Location: Vermont, USA

Re: Is This the RAM for Me and My Motherboard?

Postposted on Tue Jun 28, 2011 3:14 am

JustAnEngineer wrote:You might also see if someone who has recently upgraded to Sandy Bridge might sell or give you an old LGA 775 motherboard that has 4 DIMM slots instead of two.

Yeah? Well how much do you think such a motherboard might cost? Do you think it's a good idea to buy a used motherboard? Do you know from where I could get one? Maybe I will, if the price is right, BEFORE buying RAM. But you know what I should buy and about how much it should cost hehehe
There has been multiple Fatal Errors in TheTechReportForums.ini

Utilize Alternatives (Y/N)?
>Y

FATALITIES!
The Lord of the Flies wins!
The Lord of the Flies
Gerbil Team Leader
 
Posts: 249
Joined: Fri Dec 24, 2004 5:34 pm

Re: Is This the RAM for Me and My Motherboard?

Postposted on Sat Jul 02, 2011 1:12 pm

Okay, I guess no one's going to answer that, so I'm just gonna buy the RAM. Maybe in the future I can have such a board, but meanwhile, I'll just go and get this RAM for the board I have hehe
There has been multiple Fatal Errors in TheTechReportForums.ini

Utilize Alternatives (Y/N)?
>Y

FATALITIES!
The Lord of the Flies wins!
The Lord of the Flies
Gerbil Team Leader
 
Posts: 249
Joined: Fri Dec 24, 2004 5:34 pm

Re: Is This the RAM for Me and My Motherboard?

Postposted on Sat Jul 02, 2011 1:21 pm

The Lord of the Flies wrote:Okay, I guess no one's going to answer that, so I'm just gonna buy the RAM. Maybe in the future I can have such a board, but meanwhile, I'll just go and get this RAM for the board I have hehe


At this point, you're better off saving for a new motherboard, CPU and RAM- but I can tell you that even with a dual-core, I saw a huge performance jump in anything gaming related when going from 2GB to 4GB.
Canon 6D||[24-105/4L IS USM|100/2.8L Macro IS USM|70-300/4-5.6 IS USM|40/2.8 STM|50/1.4 USM|85/1.8 USM|Samyang/Bower 14/2.8 Full-Manual Rectilinear Wide-angle|
Canon EOS-M|11-22/4-5.6 IS STM|22/2 STM|EF-M 18-55/3.5-5.6 IS STM|
For sale!|24/2.8 IS USM
|
Airmantharp
Maximum Gerbil
 
Posts: 4694
Joined: Fri Oct 15, 2004 9:41 pm

Re: Is This the RAM for Me and My Motherboard?

Postposted on Sat Jul 02, 2011 1:36 pm

Airmantharp wrote:At this point, you're better off saving for a new motherboard, CPU and RAM-

Whoops! Too late!
but I can tell you that even with a dual-core, I saw a huge performance jump in anything gaming related when going from 2GB to 4GB.

Well that's great! Because I just ordered this. hehehehe I can hardly wait, HARDLY WAIT! YAAAA-ha-ha-HAAA!
There has been multiple Fatal Errors in TheTechReportForums.ini

Utilize Alternatives (Y/N)?
>Y

FATALITIES!
The Lord of the Flies wins!
The Lord of the Flies
Gerbil Team Leader
 
Posts: 249
Joined: Fri Dec 24, 2004 5:34 pm


Return to Motherboards, Chipsets, & RAM

Who is online

Users browsing this forum: No registered users and 7 guests