I have a intel s3000ahv server running raid 1 and Windows 2003. I wanted some additional storage so decided to just add an extra 2 TB hard drive as a data drive. After installing the extra SATA drive, I discovered that the bios attached the drive to the raid as a hot swap. Does not seem to allow the other SATA ports to be used without them being part of the raid. I saw a Syba sd-sata-1e1ipci stat controller card on new egg that says it supports Windows 2003. Will that allow me to do what I want then, leave the raid on the main board, but add a separate hard drive for storing some data on that will be little used?