OK - Here we go !!
I have a Samsung DLP Model # HLN4365W TV that I'm having problems with. When I turned it on, power light would blink, but TV would not come on. I did some research on this sight & others & came to the conclusion I needed to change the Lamp. Went to Fry's purchased a new Lamp, installed it, but no change. Further
research showed it was probably the Ballast ? I purchased a new Ballast & installed it. I tried it with the original lamp, but same result - Power light blinking 2 or 3
times then all 3 lights would blink. Trouble Shooting Guide says change the lamp. I put the new Lamp in with the new Ballast installed & it powered up a came on !!!
Picture looks great, started patting myself on the back, thought I had it fixed !!! It is working fine, then the Picture "Freezes-Up" Black & White. I turned it off then
back on & it looks good again ? Then, after about 5 to 10 minutes, it Freezes-Up again Black & White. This is where I am now, It will come on for a little while, then
Freeze-Up ? ANY IDEAS will be appreciated !!!
