Samsung TV Power Board Problem LTN406WX/XAA

What you see is what you get, including photography, displays, and video equipment.

Moderators: Dposcorp, SpotTheCat

Samsung TV Power Board Problem LTN406WX/XAA

Postposted on Mon Mar 15, 2010 5:53 pm

Hey, I received a broken Samsung 40inch LCD television. Model number: ltn406wx/xaa Power Board Number: BN94-00443w. I plugged in and turned it on to see what the issue was, the screen was in and out of picture. I'm not sure if the sound was working or not, because i had to turn it off quickly because it smelt like it was burning.......which it was. I opened the back of the television and removed the power board, the capacitors and resistors look to be in good shape however when I flipped the board over I discovered a burn mark on the bottom, directly above one of the two rectangle shaped objects (I believe it's a resistor but I'm unsure). I have pictures of the board and close ups of the capacitors, resistors and the burn mark on the bottom. Any advice? Should i just get a new power board? If so, does anyone know where I could get one? Thanks for all the help, I hope the pictures I upload will help some of you with similar problems. THANKS AGAIN!

Board on tv
Image

Capacitors, one has a blue mark on it, don't know if that is blown or not.
Image

Burn Mark On back side of board. (Source of terrible smell)
Image

Close Up
Image

Reverse side of the burn (I don't know if those are resistors or not, the burn is on the top component).
Image

Post any help you can offer, I hope these pictures help someone out there!
allenw3658
Gerbil In Training
 
Posts: 2
Joined: Mon Mar 15, 2010 3:39 pm

Return to Visual Haven

Who is online

Users browsing this forum: No registered users and 6 guests