Your DRAM has multiple SPD timing profiles for different clock speeds. The ones for the slower clock speeds have lower latency. When you switch the multiplier with the settings in "auto," the motherboard is switching to the lower latency profile. You can look at your memory's timing tables using the SPD tab of CPU-Z.Crayon Shin Chan wrote:All DRAM timing values were set to "auto". I tried setting CAS, RAS to CAS, RAS PRE and ACT to 9-9-9-24 (the motherboard actually runs them faster than the SPD recommends, so 9-9-9-24 is actually a step backwards, plus I set the speed to 1100MHz).
JustAnEngineer wrote:The other thing to watch for is that your RAM speed setting may be overclocked with your processor interface overclock. If you increase the processor interface speed by 20%, you may need to drop the RAM speed setting by 20% to achieve the same actual RAM frequency.
Users browsing this forum: No registered users and 5 guests