So I just popped in a 1055t (14x multi) open box from Newegg and within the hour I'm relatively stable @
295x14 = 4130MHZ
HT x7 = 2065 1.3 something v
NB x7 = 2065 1.275v
DDR2 @ 2.1v 980 5-5-5-13 2T (I know there's a bit of headroom left here)
Coretemp/Overdrive reads 18c idle (good water cooling), which sounds ridiculous since my x2 550 @3.8 would idle at 30c
Anything over 4150 won't make it into Windows and higher/lower voltages don't help - doesn't matter I'm happy with this OC
But I can't seem to get the NB Freq up any higher. I have tried upping and lowering the voltage and it's always a no-go. I have seen some benchmarks with higher NB freq on overclocked Phenom II's and sometimes there is a nice increase. Any ideas? On my board, changing the NB voltage also changes the HT voltage...not sure how high I can go. I have heard that 1.35v on the NB is fine but at that setting my HT is over 1.4v.