2600K load temps - 65 degrees?

Speed addicts anonymous.

Moderator: Starfalcon

2600K load temps - 65 degrees?

Postposted on Mon Sep 26, 2011 5:01 am

Hey all,
Been working with this current build for about a month or two, and its almost where I want it:
Asus P8Z68-V Pro
2600K
650D case
H50 cooler (with fans set as intake)
OZC Agility 3
750W power supply that intakes from below the case
Zotac 560 Ti

(Can't think what else would be relevent to cooling)

I have the processor clocked at 4532Mhz (103MHz x 44) @ 1.37 V.

When I idle, the Asus tool has me at around 25-30 degrees. At load (using both SMP and GPU Folding@Home), I'm getting temps of between 63-65 degrees.

Is that a decent range? THis is my first foray into non-stock cooling, and the first time I've applied my own thermal paste (after a decade of building my own machines!)

Just looking for some validation!
Hawkins
Gerbil
 
Posts: 11
Joined: Wed Aug 11, 2010 2:32 pm

Re: 2600K load temps - 65 degrees?

Postposted on Mon Sep 26, 2011 5:24 am

Running at 4.5Ghz with 65 degress loads temps is extremely good.

As a rule of thumb, anything under 70-75 degrees is perfectly fine.
Core i5 2500k @ 4Ghz | MSI 6950 Twin Frozr III | 8Gb DDR3 1600Mhz | ASUS Z68 Pro | 1200W Thermaltake Toughpower | OCZ Lian Li V2010b | HP LP2475w
mjallan123
Gerbil First Class
 
Posts: 161
Joined: Fri Jan 19, 2007 12:08 pm
Location: Scotland

Re: 2600K load temps - 65 degrees?

Postposted on Mon Sep 26, 2011 5:54 am

I have the same cpu plus a almost identical cooler with push pull quiet fans exhaust @4,2ghz, i max at 62c but only when my 560tis are loaded. so ide say your doin good:)
2600k HT on@4705mhz 8gb Cas9 1600 mem 2x EVGA GTX770 4gb Classified cards in SLI @1320 mhz core and 2003 mhz mem,mounted in CM HAF922 with a TX-850 PSU 2xHTPC's 2xi3 2120 3.3ghz dual core,1xasus LP HD6570 1xHIS hd7750@1150core1325mem,55"PanyVT30
vargis14
Graphmaster Gerbil
 
Posts: 1233
Joined: Fri Aug 20, 2010 6:03 pm
Location: philly suburbs


Return to Overclocking, Tweaking, & Cooling

Who is online

Users browsing this forum: No registered users and 2 guests