I have a a pair of MSI P67A-C43 mobos and it seem like HWmonitor has some issues reading the sensors. It reads 12V rail at 8.18V which is wrong... my multimeter reads at 12.1V. TMPIN1 goes to about 100C while using prime 95, and I thought that maybe it was the chipset temp... nope, the heatsink is just warm to the touch, maybe 50C. Ram and CPU were also warm to the touch. So I wonder what could possibly be 100C in there, and I read that some of these temp readouts are bogus because they aren't "connected" to anything. At idle that temp reading goes down to 44C, so it's reading something, just maybe it's off by a bit.
Anyone have any ideas what this is reading? Also, anyone have any suggestions of a better temp monitoring software?