Want to add a HD

All things storage here: hard drives, DVD RW drives, little wicker baskets.

Moderators: morphine, Steel

Want to add a HD

Postposted on Sat Nov 30, 2002 10:12 pm

I'm planning on adding another HD to my current setup, plugging it into the slave port of my existing IDE cable. I'm planning to use this HD to install Linux, just to play around with it.

I would like to know how you would go around setting it to boot up so I can still use my Windows HD to bootup whenever I need it. Also wondering, how much power does a HD consume, just want to make sure my PSU can handle it.

Thanks in advance.
*yawn*
etilena
Gerbil Jedi
 
Posts: 1669
Joined: Wed Jun 12, 2002 6:43 am
Location: .ozziefied.

Postposted on Sun Dec 01, 2002 9:02 pm

if you install linuix onto another hard drive when you boot up it will boot to your primary hard drive and if it detects two oses it will give you a option to boot to linuix or boot to dos (what it means by that is a dos based os. ie windows of sometype)
Bensam123
Gerbil Elite
 
Posts: 941
Joined: Wed May 29, 2002 11:19 am

Postposted on Tue Dec 10, 2002 3:45 pm

Actually, the bios boot direction will be to either of your two hard drives, (not either/or switchable) if both are on the same channel. So you have to flip your bios setting between the two HDs on the same channel to alternate between OS's. Not a big deal, but you'd need to slip into bios to reset the boot HD if you wanted to change the OS from the last one you used.

I expect that you would only have a choice of OS (without changing bios setting) at boot if you had both OS's on different partitions of the same HD.
You may be right, but I know darn well you're wrong...
purrybonker
Gerbil First Class
 
Posts: 141
Joined: Wed Nov 13, 2002 2:41 pm


Return to Storage

Who is online

Users browsing this forum: No registered users and 4 guests