Windows 8.1 PC will not enter sleep automatically

Monopoly money comes in many flavors: 7, Vista, XP, 2K, ME, 98, etc.

Moderators: Flying Fox, Ryu Connor

Windows 8.1 PC will not enter sleep automatically

Postposted on Sun Nov 17, 2013 11:20 pm

My Windows 8.1 PC will not enter sleep on its own, if I do it manually it works no problem. I ran the Power Efficiency Diagnostics Report, these were my results. I'm noticing that its my two errors at the top of the report, but I don't know how to fix them. It would be greatly appreciated if anyone could help me out.

Analysis Results
Errors
System Availability Requests:System Required Request
The service has made a request to prevent the system from automatically entering sleep.
Requesting Service Schedule

System Availability Requests:System Required Request
The service has made a request to prevent the system from automatically entering sleep.
Requesting Service defragsvc

USB Suspend:USB Device not Entering Selective Suspend
This device did not enter the USB Selective Suspend state. Processor power management may be prevented when this USB device is not in the Selective Suspend state. Note that this issue will not prevent the system from sleeping.
Device Name USB Composite Device
Host Controller ID PCI\VEN_8086&DEV_1C26
Host Controller Location PCI bus 0, device 29, function 0
Device ID USB\VID_04D9&PID_A070
Port Path 1,4

USB Suspend:USB Device not Entering Selective Suspend
This device did not enter the USB Selective Suspend state. Processor power management may be prevented when this USB device is not in the Selective Suspend state. Note that this issue will not prevent the system from sleeping.
Device Name USB Mass Storage Device
Host Controller ID PCI\VEN_8086&DEV_1C26
Host Controller Location PCI bus 0, device 29, function 0
Device ID USB\VID_18E3&PID_9106
Port Path 1,8

USB Suspend:USB Device not Entering Selective Suspend
This device did not enter the USB Selective Suspend state. Processor power management may be prevented when this USB device is not in the Selective Suspend state. Note that this issue will not prevent the system from sleeping.
Device Name NETGEAR WNDA3100v2 N600 Wireless Dual Band USB Adapter
Host Controller ID PCI\VEN_8086&DEV_1C2D
Host Controller Location PCI bus 0, device 26, function 0
Device ID USB\VID_0846&PID_9011
Port Path 1,3

USB Suspend:USB Device not Entering Selective Suspend
This device did not enter the USB Selective Suspend state. Processor power management may be prevented when this USB device is not in the Selective Suspend state. Note that this issue will not prevent the system from sleeping.
Device Name USB Root Hub
Host Controller ID PCI\VEN_8086&DEV_1C2D
Host Controller Location PCI bus 0, device 26, function 0
Device ID USB\VID_8086&PID_1C2D
Port Path

USB Suspend:USB Device not Entering Selective Suspend
This device did not enter the USB Selective Suspend state. Processor power management may be prevented when this USB device is not in the Selective Suspend state. Note that this issue will not prevent the system from sleeping.
Device Name USB Root Hub
Host Controller ID PCI\VEN_8086&DEV_1C26
Host Controller Location PCI bus 0, device 29, function 0
Device ID USB\VID_8086&PID_1C26
Port Path

USB Suspend:USB Device not Entering Selective Suspend
This device did not enter the USB Selective Suspend state. Processor power management may be prevented when this USB device is not in the Selective Suspend state. Note that this issue will not prevent the system from sleeping.
Device Name Generic USB Hub
Host Controller ID PCI\VEN_8086&DEV_1C26
Host Controller Location PCI bus 0, device 29, function 0
Device ID USB\VID_8087&PID_0024
Port Path 1

USB Suspend:USB Device not Entering Selective Suspend
This device did not enter the USB Selective Suspend state. Processor power management may be prevented when this USB device is not in the Selective Suspend state. Note that this issue will not prevent the system from sleeping.
Device Name Generic USB Hub
Host Controller ID PCI\VEN_8086&DEV_1C2D
Host Controller Location PCI bus 0, device 26, function 0
Device ID USB\VID_8087&PID_0024
Port Path 1

USB Suspend:USB Device not Entering Selective Suspend
This device did not enter the USB Selective Suspend state. Processor power management may be prevented when this USB device is not in the Selective Suspend state. Note that this issue will not prevent the system from sleeping.
Device Name USB Composite Device
Host Controller ID PCI\VEN_8086&DEV_1C26
Host Controller Location PCI bus 0, device 29, function 0
Device ID USB\VID_04F2&PID_0603
Port Path 1,3

CPU Utilization:Processor utilization is high
The average processor utilization during the trace was high. The system will consume less power when the average processor utilization is very low. Review processor utilization for individual processes to determine which applications and services contribute the most to total processor utilization.
Average Utilization (%) 28.35
ClintBeastWoodx
Gerbil In Training
 
Posts: 3
Joined: Sun Nov 17, 2013 10:45 pm

Re: Windows 8.1 PC will not enter sleep automatically

Postposted on Sun Nov 17, 2013 11:30 pm

Also I have tried disabling HOMEGROUP which i know has caused this problem for a lot of people, this did not fix my issue..
ClintBeastWoodx
Gerbil In Training
 
Posts: 3
Joined: Sun Nov 17, 2013 10:45 pm

Re: Windows 8.1 PC will not enter sleep automatically

Postposted on Mon Nov 18, 2013 12:06 am

No need to dupe post. Please continue discussion here.
Image
The Model M is not for the faint of heart. You either like them or hate them.

Gerbils unite! Fold for UnitedGerbilNation, team 2630.
Flying Fox
Gerbil God
 
Posts: 24140
Joined: Mon May 24, 2004 1:19 am


Return to Windows

Who is online

Users browsing this forum: No registered users and 3 guests