Page 8 of 8

Re: UnitedGerbilNation Census

Posted: Thu Jul 31, 2008 6:47 pm
by Gerbil Jedidiah
Tamale wrote:
I haven't been in a place where it made sense for me to fold for the UGN for quite some time, but I'm happy to report that I just got a new opportunity to add a decent chunk of power to the mob.

I got two dual opteron workstations runnin 2 instances each of the standard linux client (can't do 64 bit I'm afraid, I tried it and it didn't work), and one dual opty running the smp client with both cpus chuggin away.. for a total of somewhere around 12ghz of good 'ole fashioned K8 power. Hope it helps!


Not that's a HOT TAMALE! Woohoo! :D :P 8)

Re: UnitedGerbilNation Census

Posted: Tue Aug 19, 2008 11:09 am
by jeffry55
Welcome to Team TR and UGN Atvar! :D I apologize for being slow on recognizing your membership in the mighty Nation of Gerbils! We are poised to put a hurtin' on a few folders around here and we are glad you are here to help with the smackdown!! :P :P

Your name has been added to the UGN Census.

Are you running the latest Cuda drivers? I think the number is 177.83. I am getting 5100 ppd out of my 8800 GTS with that driver. :o :P

Atvar666 wrote:
Hi everyone

I have been a long time reader of TR and have been facinated by the entire distributed computing effort and UGN's participation in this effort since I first read about it. I finally decided to get off the bench and take part (rather late than never I suppose), so about a week ago I decided to have a look at the fah GPU2 client to see just how productive a GPU could be and what impact running the GPU2 client would have on the rest of my pc usage. Surprisingly it has had very little effect at all to normal pc usage and my 8800GT has been contributing about 3500ppd to the UGN effort for the last week. My pc is online virtually 24/7 I will leave it folding in UGN's name. I will hopefully be adding my server, once it has been rebuilt, to the effort in the near future

Atvar

Re: UnitedGerbilNation Census

Posted: Tue Aug 19, 2008 11:11 am
by jeffry55
Welcome back Tamale! Help us put a whoopin' on Leor! :P :D

Tamale wrote:
I haven't been in a place where it made sense for me to fold for the UGN for quite some time, but I'm happy to report that I just got a new opportunity to add a decent chunk of power to the mob.

I got two dual opteron workstations runnin 2 instances each of the standard linux client (can't do 64 bit I'm afraid, I tried it and it didn't work), and one dual opty running the smp client with both cpus chuggin away.. for a total of somewhere around 12ghz of good 'ole fashioned K8 power. Hope it helps!

Re: UnitedGerbilNation Census

Posted: Thu Aug 21, 2008 12:01 am
by MaxTheLimit
I got my buddy drunk and got another 8800GT folding with the GPU client for the UGN! Cost me 8 guinness pints though. :cry:

Re: UnitedGerbilNation Census

Posted: Thu Aug 21, 2008 10:59 am
by jeffry55
MaxTheLimit wrote:
I got my buddy drunk and got another 8800GT folding with the GPU client for the UGN! Cost me 8 guinness pints though. :cry:


You are a Trooper Max! :D Innovation is the key to success!! :P :lol: :P

I think I will share this recruitment method with all the Gerbils!! :D

Re: UnitedGerbilNation Census

Posted: Wed Sep 10, 2008 1:39 pm
by jeffry55
Check out the updated front page! 8)

Re: UnitedGerbilNation Census

Posted: Sat Nov 15, 2008 9:23 pm
by pfntn
I've been folding off and on for UGN for a while now, in stealth mode. Since the weather has turned cooler, I'm back on.
Currently just running GPU2 on an 8600GT (AM2 5000+ clocked to 3.2) and another on an 8400GS (S939 AX2 3800+). I've got access to a Quadro FX1700, and I'm trying to figure how to add that to the AM2 box, for both folding and maybe as a dedicated PhysiX card while gaming (riiight). Haven't seen much info on mixing a Quadro with a gaming card in the same machine, but I'm assuming it shouldn't be too hard, and the 1700 is very similar to the 8600 core-wise.

Re: UnitedGerbilNation Census

Posted: Mon Nov 17, 2008 1:23 am
by jeffry55
Welcome to UGN pfntn!! :D Glad to have you on board. I have added your name to the UGN Census.

Re: UnitedGerbilNation Census

Posted: Mon Nov 17, 2008 7:21 am
by pfntn
Remind me not to post after a few (too many) brews...
I should have mentioned that those two were my current GPU2 clients. I have six others that are running the CPU client:

S754 3000+
AXP 3200+
AXP 2500+
AXP 2400+
P4 3.0 w/HT
P4 2.66

As a side note, the Quadro doesn't fold for crap, even though it is identical to the 8600GT with exception to the clock speeds. Sadly, the 8400GS is faster.
Should be good for close to 3000 PPD when all are active.

Re: UnitedGerbilNation Census

Posted: Wed Nov 19, 2008 8:38 pm
by jeffry55
pfntn wrote:
Remind me not to post after a few (too many) brews...
I should have mentioned that those two were my current GPU2 clients. I have six others that are running the CPU client:

S754 3000+
AXP 3200+
AXP 2500+
AXP 2400+
P4 3.0 w/HT
P4 2.66

As a side note, the Quadro doesn't fold for crap, even though it is identical to the 8600GT with exception to the clock speeds. Sadly, the 8400GS is faster.
Should be good for close to 3000 PPD when all are active.


Nice farm pfntn! :D It is good to have you on our side.

Re: UnitedGerbilNation Census

Posted: Tue Apr 07, 2009 4:45 pm
by asimovfan01
Just built my first system with some help from TR. Figure I'll put it to good use, fold under UGN. My GTX295 will be working for ya.

Re: UnitedGerbilNation Census

Posted: Tue Apr 07, 2009 5:17 pm
by Gerbil Jedidiah
asimovfan01 wrote:
Just built my first system with some help from TR. Figure I'll put it to good use, fold under UGN. My GTX295 will be working for ya.



Awesome! Let me know if you need any help setting up the GTX295 8)

Been there. Done that.

Re: UnitedGerbilNation Census

Posted: Tue Apr 07, 2009 7:26 pm
by jeffry55
asimovfan01 wrote:
Just built my first system with some help from TR. Figure I'll put it to good use, fold under UGN. My GTX295 will be working for ya.


Welcome to the Nation of Gerbils asimovfan01! :P Your GTX 295 will be a welcome addition to the gerbil hoard. I say, "Yummy!!" to 14k ppd!! :P :lol:

Your name has been added to the UGN Census.

Come over to the UGN's drive to the top topic thread and say "Howdy!" :wink:

Re: UnitedGerbilNation Census

Posted: Wed Apr 08, 2009 12:25 pm
by Gerbil Jedidiah
asimovfan01 wrote:
Just built my first system with some help from TR. Figure I'll put it to good use, fold under UGN. My GTX295 will be working for ya.


Our PPD is doing very well today. It appears you figured out the multi-gpus. :D

Re: UnitedGerbilNation Census

Posted: Wed Apr 08, 2009 12:36 pm
by jeffry55
Gerbil Jedidiah wrote:
asimovfan01 wrote:
Just built my first system with some help from TR. Figure I'll put it to good use, fold under UGN. My GTX295 will be working for ya.


Our PPD is doing very well today. It appears you figured out the multi-gpus. :D


Jeffry says, "Yum!!"

Re: UnitedGerbilNation Census

Posted: Sat Aug 22, 2009 12:23 pm
by mghong
mghong report from malaysia...folding with his very first pc Atom330...joining team of 2630... 8)

Hopefully i woudl't get kill on my first mission...currently working on
urrent Work Unit
-----------------
Name: p4441_Seq42_Amber03
Tag: P4441R228C3G31
Download time: August 22 17:12:30
Due time: October 24 17:12:30
Progress: 0% [__________]

Re: UnitedGerbilNation Census

Posted: Mon Feb 07, 2011 2:07 am
by Crayon Shin Chan
Welcome fellow Malaysian!

Re: UnitedGerbilNation Census

Posted: Sun Jul 07, 2013 12:56 pm
by Khali
I just got started on this today. My name was taken so I ended up with Khali87.

One question, where do you get the signatures for forums showing your stats?

Re: UnitedGerbilNation Census

Posted: Mon Jul 08, 2013 11:47 am
by farmpuma
Welcome to team 2630!

Most of us use ( http://folding.extremeoverclocking.com/?nav=IMAGES ) for our stats sig.

Re: UnitedGerbilNation Census

Posted: Sat Dec 31, 2016 7:45 am
by LoneWolf15
2013 last post?  This thread needs a little love.

Image