Hey everyone, I just purchased a Corsair Pro Performance 128Gb drive, and hooked it all up last night and got Windows on it. I have it plugged in through the Intel 6Gbps Brown-colored port on my P67 Sabertooth. This is exactly what it says to do in the manual, and I am running it in AHCI mode. In the BIOS it reports as 6Gbps, so that all checks out. However, once within Windows nothing reports it as being SATA III nor does it perform at what I would expect this drive to perform at. It seems to still be running in the SATA II spec. When setting it up, I even used the cables from Asus labeled Sata III 6Gbps. Here are some screenshots so you know what I'm seeing:
This is the drive information through HD Tune:http://bupp-portal.com/pictures/hdtune_info.PNG
This is the drive information through HD Sentinel:http://bupp-portal.com/pictures/hdsentinel_info.PNG
This is the benchmark results through HD Tune:http://bupp-portal.com/pictures/hdtune_bench.PNG
I have all the driver's installed for the Motherboard before running or looking at any of this information. Does anyone have any ideas of what I'm doing wrong? From reviews it should be somewhere around 400MBps+ rather than the 350MBps+ I'm seeing. This looks like I said before that its limiting itself to SATA II speeds. Any help would be appreciated!