Personal computing discussed

Moderators: renee, Starfalcon

 
SpartanCaptain
Gerbil Team Leader
Topic Author
Posts: 216
Joined: Mon Mar 16, 2009 5:01 pm

Overclock check?

Fri Mar 02, 2012 4:15 pm

I went to my bios and they had an option for OC auto. I chose 4.4 ghz for my i5 2500k. I am trying to check it in cpuz but it keeps throttling down. How do I stop that? Disable speed step? And is it ok to do that?
 
integer
Gerbil Team Leader
Posts: 294
Joined: Thu Dec 13, 2007 12:23 pm
Location: New Jersey

Re: Overclock check?

Fri Mar 02, 2012 4:37 pm

SpartanCaptain wrote:
I went to my bios and they had an option for OC auto. I chose 4.4 ghz for my i5 2500k. I am trying to check it in cpuz but it keeps throttling down. How do I stop that? Disable speed step? And is it ok to do that?

You should be running some CPU intensive programs to see the frequency reach your selected values. You could try Prime95, Orthos, IntelBurnTest, LinX. Unless there is some good reason, no need to disable SpeedStep (though, if needed, you can do that in the BIOS).
(My build, thanks to TR) i5-3570k | P8Z77-V | DDR3 1600 (4x4 GB) | 7950 | 850 EVO 500 GB | m4 128 GB | Blue SE16 500 GB | Green SE16 1 TB | Xonar DG | M12II 520 W | 550D | LP2475W | Blu-Ray | Shine Zero | MX310 | Windows 10 Home
 
SpartanCaptain
Gerbil Team Leader
Topic Author
Posts: 216
Joined: Mon Mar 16, 2009 5:01 pm

Re: Overclock check?

Fri Mar 02, 2012 4:55 pm

Ok this is what it says
4389.85mhz
multiplier 44
bus 100
voltage is looking like it stable around 1.39

cpu temp is right now at 70C and climbing. What is a safe temp for it?
 
SpartanCaptain
Gerbil Team Leader
Topic Author
Posts: 216
Joined: Mon Mar 16, 2009 5:01 pm

Re: Overclock check?

Fri Mar 02, 2012 5:21 pm

Ok changed it up.
Changed to a manual Overclock.
Only changed multiplier to 43
Now have 4300mhz
cpu temp 59 at full load.
voltage 1.277
 
integer
Gerbil Team Leader
Posts: 294
Joined: Thu Dec 13, 2007 12:23 pm
Location: New Jersey

Re: Overclock check?

Fri Mar 02, 2012 5:56 pm

SpartanCaptain wrote:
cpu temp is right now at 70C and climbing. What is a safe temp for it?

70C+ looks a little high if the case has sufficient ventilation, and the room is not warm. When I had the same problem, the gerbils suggested a better thermal paste and possibly adding a better CPU cooler.

SpartanCaptain wrote:
Ok changed it up.
Changed to a manual Overclock.
Only changed multiplier to 43
Now have 4300mhz
cpu temp 59 at full load.
voltage 1.277

Looks better now. It is recommended to run one of those tools for more than a couple of hours to ensure stability. Also, not sure what you are using to monitor temperatures - RealTemp and CoreTemp are usually suggested.
(My build, thanks to TR) i5-3570k | P8Z77-V | DDR3 1600 (4x4 GB) | 7950 | 850 EVO 500 GB | m4 128 GB | Blue SE16 500 GB | Green SE16 1 TB | Xonar DG | M12II 520 W | 550D | LP2475W | Blu-Ray | Shine Zero | MX310 | Windows 10 Home
 
Welch
Grand Gerbil Poohbah
Posts: 3582
Joined: Thu Nov 04, 2004 5:45 pm
Location: Alaska
Contact:

Re: Overclock check?

Sun Mar 04, 2012 11:17 am

I'd recommend Prime95 as it will not only stress the CPU but test ram and other things in the process and let you know if your returning errors with your overclock, also logs information along the way. Just let it rip and call it good. I personally don't like to let anything of mine get past the 60-65 barrier at full load. If your hitting 70 at 4.4 vs 59 at 4.3, then I'd sacrifice the 100mhz in order to lower your temps by 11*C, that or get an aftermarket cooler if you feel the need to push it a little further. What PSU/Motherboard are you running with that?

If your going to get into the aftermarket cooler I was told the coolermaster 212+ is good.

http://www.newegg.com/Product/Product.a ... 6835103065

If you do that your also going to want to use something like Arctic Silver 5 (an old standard) or some of the new overpriced stuff with crushed diamonds in it. I've been a big fan of AS5 since back in the early 2000's with my AMD Athlon system, worked wonder even with the stock CPU. But for the most part your going to see little results when it comes to using an aftermarket thermal paste with a stock aluminum cooler.

If you want to buy some other hardcore cooling products you can look here too. FrozenCPU.com. I haven't purchased much from there in a long time, but what I always loved on that site was their ability to carry coolers than no one else had. They also carry a high number of pure/solid copper heat sinks. If you have the choice of copper vs aluminum (assuming all other things like design are equal) ALSO go with the copper as it will move so much more heat.
"I think there is a world market for maybe five computers."
Thomas Watson, chairman of IBM, 1943

1600x | Strix B350-F | CM 240 Lite | 16GB 3200 | RX 580 8GB | 970 EVO | Corsair 400R | Seasonic X 850 | Corsair M95 / K90 | Sennheiser PC37x
 
SpartanCaptain
Gerbil Team Leader
Topic Author
Posts: 216
Joined: Mon Mar 16, 2009 5:01 pm

Re: Overclock check?

Mon Mar 05, 2012 10:41 am

That is with the ASRock Z68 Extreme3 Gen3
And I already have a h212+ Cpu fan. I didn't realize how big that heatsink is till it came in. Holy god.
The computer runs great at its current overclock. I have ran prime, also have played arkham city for hoursssss without a crash.
 
DPete27
Grand Gerbil Poohbah
Posts: 3776
Joined: Wed Jan 26, 2011 12:50 pm
Location: Wisconsin, USA

Re: Overclock check?

Mon Mar 05, 2012 11:08 am

Good call on manually setting the OC. Always keep voltage at stock if at all possible. This will ensure lower temps and longer life expectancy of the CPU. The only time I suggest increasing voltage is for a temporary overclock as it does help maintain stability at higher clock speeds. 59C under load at 4.3Ghz is perfectly fine, temps depend on how much cool/fresh air your cpu fan is getting (aka case ventillation) as well as thermal paste quality and distribution, HSF mounting pressure, heatsink performance, fan speed, etc. etc.
Main: i5-3570K, ASRock Z77 Pro4-M, MSI RX480 8G, 500GB Crucial BX100, 2 TB Samsung EcoGreen F4, 16GB 1600MHz G.Skill @1.25V, EVGA 550-G2, Silverstone PS07B
HTPC: A8-5600K, MSI FM2-A75IA-E53, 4TB Seagate SSHD, 8GB 1866MHz G.Skill, Crosley D-25 Case Mod

Who is online

Users browsing this forum: No registered users and 1 guest
GZIP: On