Yes, that should work fine. 4x1 GiB of PC3200 is the maximum memory that can be installed on that motherboard.Mark68 wrote:Can I add another 2GB (2x1GB) of Kingston DDR PC3200 (KVR400X64C3AK2/2G) RAM in the second and fourth physical slots?
vargis14 wrote:I don't see why not. But the main thing is going to be what operating system u are using 32 bit or 64 bit. I remember my nforce 3 150 board was unable to run windows 7. If you run a 32 bit version of xp or win 7 you will not be able to utilize all 4 gb of memory only a little over 3 gb. You need a 64 bit windows os to use all 4 gb, also I would make sure whatever memory you buy can run at the same timings as your current memory just to be safe I am a bit rusty on old 939 pin boards specially considering I owned a 940 pin fx-53 on a asus sk8n.....a friend of mine is using a dfi board with a fx 55 still I can ask him how much memory he is using.
JustAnEngineer wrote:Yes, that should work fine. 4x1 GiB of PC3200 is the maximum memory that can be installed on that motherboard.Mark68 wrote:Can I add another 2GB (2x1GB) of Kingston DDR PC3200 (KVR400X64C3AK2/2G) RAM in the second and fourth physical slots?
thegst wrote:I owned this board and ran it with a very high OC. With 4 sticks step cmd rate down to 2t.
thegst wrote:If you're running that board, you need to know something about basic BIOS settings. That is not a board for an amateur - it exposes a lot of settings that if set wrong can be detrimental to stability.
"DRAM Configuration: CPC: Disable" = 2T command rate. I understand you are not overclocking. It is a factor of the A64 not being able to handle 4 sticks of memory at 1T command rate; remember, the memory controller is on the CPU.
vargis14 wrote:Absolutely drop the command rate to 2T as everyone else said.
As for overclocking My friend has the same board with a fx57...not the fx55 like i thought but that motherboard is a great overclocking board....DFI was the boards to get back in the day.
I know that chip runs at 2.2ghz you should be able to get 2.6 easy sometimes 2.8 with that motherboard .....do not be afraid they don't run that hot overclocked and there are plenty of guides and youtube videos showing you how to do it. Just follow instructions
Since you are trying to get the most out of that old system. Here is one example of overclocking to 2.7ghz
http://www.overclock.net/t/310696/overc ... d-pix-4-27
And no you do not have to lap your heatsink
JustAnEngineer wrote:PC3200 memory runs at 200 MHz. It's "Dual Data Rate 400" meaning that it is double-pumped to send two data bits per cycle. 2 x 200 MHz = "DDR 400".
Captain Ned wrote:If you're mixing and matching RAM sticks, everything runs at the timings of the slowest stick in the bunch.
vargis14 wrote:What i see from your screenshot is that CPUz is showing what speeds your ram is able to run at.
vargis14 wrote:It is probably running at the speed you set in the bios.
vargis14 wrote:Back in 2005 DFI had the best 939pin boards for overclocking with so many options in the bios your head will spin. Now i am not telling you this to scare you, i tell you this because you have a lot of potential power you can unlock from that 2.2GHZ 11x200 dual core cpu.
It uses a multiplier of 11 with 200 bus/ht speed. I have read that motherboard hitting 300 base clock... But you would be better off trying for 250 x 10.5 or 11 2625mhz or 2750mhz. Those are just a tiny amount of examples of the multiplier combinations that board is capable of.
vargis14 wrote:Like i said google a DFI nforce4 ultra-D overclocking with a opteron 175 denmark cpu, and find one of that many online guides/ videos on the net and try to follow the instructions and see what you can get. A extra 400-500mhz can improve performance in games a lot specifically if your cpu is bottlenecking your gpu.
Users browsing this forum: No registered users and 0 guests