CPU Performance Issues

Discussion of all forms of processors, from AMD to Intel to VIA.

Moderators: Flying Fox, morphine

CPU Performance Issues

Postposted on Sun Sep 23, 2012 6:03 pm

Hello, I am having issues with a new processor I installed the other day. My system performance has plummeted dramatically. I can’t seem to validate what the clock speed is running at. I have everything set to AUTO in the BIOs. CPU-Z shows the CPU running at 3.4 MHz. AMD Overdrive shows the clock speed at 801 MHz with a multiplier at x4 not x17. I downloaded 3DMark Vantage and it also says a clock speed of 801 MHz.

System Specs:
NEW Processor: Phenom II x4 965
OLD Processor: Phenom II x3 720
Motherboard: Gigabyte GA-MA790XT-UD4P
Graphics: GTX 260
Ram: 8 gig

I have also tweaked the multiplier in BIOs to x17.5 which should produce a clock speed of 3.5 MHz and reran all tests with the same results. I have tried it with ‘Cool n Quiet’ turned on and off. Any ideas…or am I approaching this the wrong way?

BTW, when I switched the processor out, all I did was drop the new chip in and go without any changes to the system (until I started troubleshooting). Did I miss a step here?

Thank you!
thrtysvn
Gerbil
 
Posts: 31
Joined: Thu Feb 12, 2009 9:42 pm

Re: CPU Performance Issues

Postposted on Sun Sep 23, 2012 6:22 pm

I believe 800 MHz is the speed it is supposed to run at when it is in its lowest power management state.

First of all, have you noticed an ACTUAL drop in performance in REAL applications, or are you just going by what AMD Overdrive and 3DMark are reporting? It is quite possible that they are merely reporting what the CPU is running at AT THAT TIME; if the system is very lightly loaded, then it is quite possible that it really is running at only 800 MHz when the tool is checking the clock speed.

I'm a little surprised that disabling CnQ made no difference.

Try running something to put some load on the CPU cores and see if AMD Overdrive and/or 3DMark still report 800 MHz.

Do you have the latest BIOS for that board installed?

Have you tried resetting the CMOS?
(this space intentionally left blank)
just brew it!
Administrator
Gold subscriber
 
 
Posts: 37677
Joined: Tue Aug 20, 2002 10:51 pm
Location: Somewhere, having a beer

Re: CPU Performance Issues

Postposted on Sun Sep 23, 2012 8:28 pm

Try clearing the bios definitely i would even yank the battery also for 30 mins or so with the power cord removed.
Gluck
2600k HT on@4705mhz 8gb Cas9 1600 mem 2x EVGA GTX770 4gb Classified cards in SLI @1320 mhz core and 2003 mhz mem,mounted in CM HAF922 with a TX-850 PSU 2xHTPC's 2xi3 2120 3.3ghz dual core,1xasus LP HD6570 1xHIS hd7750@1150core1325mem,55"PanyVT30
vargis14
Graphmaster Gerbil
 
Posts: 1149
Joined: Fri Aug 20, 2010 6:03 pm
Location: philly suburbs

Re: CPU Performance Issues

Postposted on Sun Sep 23, 2012 10:23 pm

Thanks for the replies!

It turns out that I needed to update my BIOS. Once I updated to the most recent version, everything started working as expected. I was running the 'F2' version of my BIOS and I updated to the latest version...'F8'.

Thanks again for all the help!! :D
thrtysvn
Gerbil
 
Posts: 31
Joined: Thu Feb 12, 2009 9:42 pm


Return to Processors

Who is online

Users browsing this forum: No registered users and 1 guest