Personal computing discussed

Moderators: renee, mac_h8r1, Nemesis

 
ludi
Lord High Gerbil
Topic Author
Posts: 8646
Joined: Fri Jun 21, 2002 10:47 pm
Location: Sunny Colorado front range

Toner cartridge, or fuser?

Sat Dec 01, 2012 1:45 am

I have an ancient HP LaserJet 4L, a slow and low-resolution printer that has been fantastically reliable. At some point in the distant past I maxed the onboard memory and that solved the only complaints I ever had about it, since I only print mixed text and low-res graphics. It currently runs as an IP printer using a TrendNet print server.

Very recently, it started spitting out a couple thick gray lines on the right-most side of every page, but the actual print content is fine. Is this a sign of a toner cartridge problem, or is the fuser finally dying?
Abacus Model 2.5 | Quad-Row FX with 256 Cherry Red Slider Beads | Applewood Frame | Water Cooling by Brita Filtration
 
Starfalcon
Gerbilus Supremus
Posts: 12008
Joined: Mon Oct 14, 2002 10:43 am

Re: Toner cartridge, or fuser?

Sat Dec 01, 2012 2:05 am

Yeah, thats the fuser, had several of those do that at my previous job.
 
Chrispy_
Maximum Gerbil
Posts: 4670
Joined: Fri Apr 09, 2004 3:49 pm
Location: Europe, most frequently London.

Re: Toner cartridge, or fuser?

Sat Dec 01, 2012 6:30 am

See if you can get a replacement fuser, even though the price might tempt you to get a newer, quieter, faster, higher-dpi laser.

Those LaserJet 4L's are workhorses. We had one in the old firm I worked for. We also had a Laserjet 8150N there that I am proud to say passed it's millionth page with less servicing (in the five years I was there) than any of our leased Xerox machines need in a fortnight. Those Canon print engines are amazingly reliable.
Congratulations, you've noticed that this year's signature is based on outdated internet memes; CLICK HERE NOW to experience this unforgettable phenomenon. This sentence is just filler and as irrelevant as my signature.
 
ludi
Lord High Gerbil
Topic Author
Posts: 8646
Joined: Fri Jun 21, 2002 10:47 pm
Location: Sunny Colorado front range

Re: Toner cartridge, or fuser?

Sat Dec 01, 2012 1:48 pm

Okay, I kind of thought so. Any suggestions for a reputable supplier? Newegg doesn't have them, Amazon is only offering used models from Marketplace sellers, the major office supply stores show nothing in their online catalogs.

I found this although the website is a bit slap-dash:
https://www.sundatasupply.com/product_d ... MgodYCEAOg

EDIT: On second thought, maybe it is the print cartridge. I pulled it out an took a look at the print drum, there are some deep wear grooves along the edge which seem to be picking up excess toner.
Abacus Model 2.5 | Quad-Row FX with 256 Cherry Red Slider Beads | Applewood Frame | Water Cooling by Brita Filtration
 
satchmobob
Gerbil Team Leader
Posts: 216
Joined: Tue Oct 15, 2002 2:42 pm
Location: Worcester, UK

Re: Toner cartridge, or fuser?

Sat Dec 01, 2012 2:17 pm

Easy way to troubleshoot this. Just stop the print half way through by opening the toner access panel before the page gets to the fuser or just power off half way through.
If your gray lines are there before it gets fused then probably the drum/toner. Give it a try.
If we cannot be free, at least we can be cheap! FZ.
 
Ryu Connor
Global Moderator
Posts: 4369
Joined: Thu Dec 27, 2001 7:00 pm
Location: Marietta, GA
Contact:

Re: Toner cartridge, or fuser?

Sat Dec 01, 2012 3:47 pm

That sounds more like a damaged drum to me.
All of my written content here on TR does not represent or reflect the views of my employer or any reasonable human being. All content and actions are my own.
 
SecretSquirrel
Minister of Gerbil Affairs
Posts: 2726
Joined: Tue Jan 01, 2002 7:00 pm
Location: North DFW suburb...
Contact:

Re: Toner cartridge, or fuser?

Sat Dec 01, 2012 5:39 pm

Drum. To much toner is always the drum. The drum is electrically charged (positive I believe) and the laser prints a negative charge on the surface. The toner has the same charge as the unexposed drum and so only sticks where the laser exposed it. This is then transfered to the paper by pressure contact. All the fuser does is melt the toner into the paper. It doesn't add or remove toner. If the image is correct on the paper but smears or flakes off, then you have a fuser problem. The problem you describe can be caused by wear on the print drum, a light leak that is exposing the drum, or probably some other things I no longer remember.

Most printers these days include the print drum in the toner cartridge, but some older printers didn't. The drum was a seperate replacable item, mainly because it was really expensive. Don't remeber how the 4L is laid out. I haven't worked on one since the mid 90s.

--SS
 
ludi
Lord High Gerbil
Topic Author
Posts: 8646
Joined: Fri Jun 21, 2002 10:47 pm
Location: Sunny Colorado front range

Re: Toner cartridge, or fuser?

Sat Dec 01, 2012 5:55 pm

The drum is in the toner cartridge. The existing cartridge is an OfficeDepot reman with at least 3-4k sheets to account for, so no big surprise. I'll pick up another one and see what that does.
Abacus Model 2.5 | Quad-Row FX with 256 Cherry Red Slider Beads | Applewood Frame | Water Cooling by Brita Filtration
 
satchmobob
Gerbil Team Leader
Posts: 216
Joined: Tue Oct 15, 2002 2:42 pm
Location: Worcester, UK

Re: Toner cartridge, or fuser?

Sun Dec 02, 2012 12:38 am

SecretSquirrel wrote:
Drum. To much toner is always the drum. The drum is electrically charged (positive I believe) and the laser prints a negative charge on the surface. The toner has the same charge as the unexposed drum and so only sticks where the laser exposed it. This is then transfered to the paper by pressure contact. All the fuser does is melt the toner into the paper. It doesn't add or remove toner. If the image is correct on the paper but smears or flakes off, then you have a fuser problem. The problem you describe can be caused by wear on the print drum, a light leak that is exposing the drum, or probably some other things I no longer remember.

Most printers these days include the print drum in the toner cartridge, but some older printers didn't. The drum was a seperate replacable item, mainly because it was really expensive. Don't remember how the 4L is laid out. I haven't worked on one since the mid 90s.

--SS


This isn't quite true. The toner is transfered to the page not by pressure but charged transfer roller which always lives directly opposite the drum in the paper path. The page travels between the transfer roller and the drum and the charge electrically 'pulls' the toner off the drum and onto the page.
Also, too much toner can be caused by many things besides a faulty drum, including a faulty fuser. Toner can be left on a faulty fuser from previous prints and then be transfered to the next print as the page passes through or even onto the same page causing ghosting of the image down the page. A faulty transfer roller or HV PSU can also cause excessive toner.

Finally, there are many, many modern printers that still use a separate drum and toner unit. Loads of Brother printers, Kyocera, samsung and Oki to name a few.

However in this case I'd fully expect it to be the drum/toner cart.
If we cannot be free, at least we can be cheap! FZ.
 
ludi
Lord High Gerbil
Topic Author
Posts: 8646
Joined: Fri Jun 21, 2002 10:47 pm
Location: Sunny Colorado front range

Re: Toner cartridge, or fuser?

Thu Dec 13, 2012 12:58 am

I installed a Xerox-branded toner cartridge tonight, and it prints perfectly now.

The Xerox cartridge was about $35 compared to $12 for the cheapest reman, but for the 5k+ pages I hope to get out of it, that's nothing. I didn't really feel like paying $70 for the OEM unit, and since Xerox does have a reasonably competent office printer line, I'm hoping their print drum will prove to be higher quality than the remans.
Abacus Model 2.5 | Quad-Row FX with 256 Cherry Red Slider Beads | Applewood Frame | Water Cooling by Brita Filtration
 
shaq_mobile
Gerbil Elite
Posts: 631
Joined: Wed Jul 16, 2008 2:33 pm

Re: Toner cartridge, or fuser?

Thu Dec 13, 2012 11:38 am

good job keeping an old printer workin! personally, i love the older HP laserjets. we only have about 5 out of 1200 printers that are still LJ4, but we have hundreds of 4000s, 4050s, 4100s, 4200s and 4250s floating around. people complain about them, but thats mostly because their plastic is discolored from age and they assume an ugly printer is a bad printer. most folks dont realize the duty cycle of a lot of those mid range laserjets is well into the tens of thousands a month. Most folks think 50 pages a day is an obscene amount. out of all the printers in our organization, there's only one that approaches it's duty cycle and it prints a 9000 page report once a week. anyways, grats!

Who is online

Users browsing this forum: No registered users and 1 guest
GZIP: On