Getting Scared of my Shutdown BSODs

Don't see a specific place for your hardware question? This is the forum for you!

Moderators: mac_h8r1, Nemesis

Re: Getting Scared of my Shutdown BSODs

Postposted on Fri Dec 28, 2012 9:46 am

The latest Memtest86 -- which they call "4.0b (server)" on their site -- does a much better job of stressing the RAM, by using all available cores.

(Suggest avoiding the Memtest86 4.0a version, and the Memtest86+ 5.0 beta -- I've found both to be flaky. Memtest86+ 4.20 is stable, but does not use all of your cores and therefore is not as good of a stress test.)
The years just pass like trains. I wave, but they don't slow down.
-- Steven Wilson
just brew it!
Gold subscriber
Posts: 43026
Joined: Tue Aug 20, 2002 10:51 pm
Location: Somewhere, having a beer

Re: Getting Scared of my Shutdown BSODs

Postposted on Fri Dec 28, 2012 10:42 am

try unplugging and re connecting ur sata cables, or replacing them all together.....i had 1 bad one and was experiencing random BSOD's with loss of access to drives....replaced it, and all was fine....ended up replacing all of them just to be safe...
Gerbil First Class
Posts: 100
Joined: Wed Apr 18, 2007 6:54 pm
Location: Clovis, CA

Re: Getting Scared of my Shutdown BSODs

Postposted on Sun Dec 30, 2012 11:07 pm

kumori wrote:Another way to check RAM is to run it at a lower than its rated speed and see if you're problems clear up.

I had some terrible OCZ Gold DDR3 RAM for X58 that caused crashes all the time. It always passed memtest, but turning it down to 1066mhz solved all my BSOD problems.

i7 processors (possibly just the older ones but I doubt it) hate >1.5v RAM I've noticed.

I still need to replace mine with only runs at 1066 also despite being 1600 at 1.65v
Graphmaster Gerbil
Posts: 1152
Joined: Thu Aug 26, 2004 6:18 am
Location: Sanity


Return to General Hardware

Who is online

Users browsing this forum: No registered users and 5 guests