OK, got my new system put together and running. The computer only sees the dvd drive and the SSD with windows on it. The SSD is drive C and the DVD drive is Drive D.
I'm getting ready to format the second SSD and the 1 terrabyte HDD and I am wondering if it will cause any issues if I change the DVD drive to drive A, the second SSD to drive D, and the HDD to drive E? Reserving the drive B slot for a future blue ray drive?
Another question. Would I be better off using a raid set up for the two SSD's? I know nothing about raid other than what I have read here and there. If it would be a better way to do it would some one care to point me to a link explaining the procedure? I have a few programs on my boot SSD do I have to start all over with a clean drive to use it in a raid configuration?
Here is my system in case that would be useful information.
Intel Core i5-3570K Ivy Bridge 3.4GHz (3.8GHz Turbo) LGA 1155 77W Quad-Core Desktop Processor Intel HD Graphics 4000 BX80637I53570K
ASUS P8Z77-V LK LGA 1155 Intel Z77 HDMI SATA 6Gb/s USB 3.0 ATX Intel Motherboard with UEFI BIOS
CORSAIR Vengeance LP 32GB (4 x 8GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory
EVGA 02G-P4-2680-KR GeForce GTX 680 2GB 256-bit GDDR5 PCI Express 3.0 x16 HDCP Ready SLI Support Video Card
2x SAMSUNG 830 Series MZ-7PC512D/AM 2.5" 512GB SATA III MLC Internal Solid State Drive (SSD) Desktop Upgrade Kit
Seagate Barracuda ST1000DM003 1TB 7200 RPM 64MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive
SeaSonic Platinum Platinum-860 860W ATX12V / EPS12V SLI Ready CrossFire Ready 80 PLUS PLATINUM Certified Full Modular Active PFC Power Supply
SAMSUNG DVD Burner 24X DVD+R 8X DVD+RW 8X DVD+R DL 24X DVD-R 6X DVD-RW 16X DVD-ROM 48X CD-R 24X CD-RW 48X CD-ROM SATA
Corsair Special Edition White Graphite Series 600T Steel / Plastic ATX Mid Tower Computer Case
COOLER MASTER GeminII S524 120mm Long Life Sleeve CPU Cooler
CORSAIR Survivor Stealth 32GB USB 3.0 Flash Drive
Windows 8 64bit OEM