I have a custom-built case for my HTPC which was born out of the necessity to fit a recycled ATX system into a hole in my entertainment system too small for any ATX case to fit. The case ended up being about 5.5"x9.5"x12.5" (width, depth, height) and fits the hole perfectly while housing an ATX mobo, ATX PSU, graphics card, and a 3.5" hdd. The case was an open-sided design to show off the components, had a programmable IR reciever that acted as a power button, as well as a standard power button that I ended up super-glueing to the side of the PSU.
Fast forward to today and I have a mITX FM2 setup with a TFX PSU sitting in it. I want a newer/better/smaller case for it, but I'm not willing to spend $75 on something like this even though it's a perfect fit. My case choices are limited by my TFX PSU (and budget) so I figured why not build another custom case. This time around though, I'd like to have at least one front USB3.0 port so I found this 2-port Front Panel USB3.0 Mount.
Now I'm thinking it would be nice to have a power button on the front of the case along with the USB3.0 ports. My problem is that I can't find a front-panel USB3.0 mount that includes a power button. I have a separate power button like this but I think it'd look cleaner if the USB3.0 and power button resided on the same backplate. Please help!!