Samsung LED tv for monitor

Building a new system? Need help choosing between parts? Then step in and let our trained gerbils assist you.

Moderator: JustAnEngineer

Samsung LED tv for monitor

Postposted on Thu Dec 24, 2009 7:15 pm

I just bought a new tv and want to biuld a gaming computer would my tv work as a monitor using HDMI cable
mavrick211
Gerbil
 
Posts: 27
Joined: Thu Dec 24, 2009 7:09 pm

Re: Samsung LED tv for monitor

Postposted on Thu Dec 24, 2009 7:45 pm

mavrick211 wrote:I just bought a new tv and want to biuld a gaming computer would my tv work as a monitor using HDMI cable


Welcome to TR!

And the answer is yes; but many questions remain, such as, what games do you want to play, and what is your budget?
Canon 6D||[24-105/4L IS USM|100/2.8L Macro IS USM|70-300/4-5.6 IS USM|40/2.8 STM|50/1.4 USM|85/1.8 USM|Samyang/Bower 14/2.8 Full-Manual Rectilinear Wide-angle|
Canon EOS-M|11-22/4-5.6 IS STM|22/2 STM|EF-M 18-55/3.5-5.6 IS STM|
For sale!|24/2.8 IS USM
|
Airmantharp
Gerbil Elder
 
Posts: 5015
Joined: Fri Oct 15, 2004 10:41 pm

Re: Samsung LED tv for monitor

Postposted on Tue Jan 12, 2010 11:39 pm

Cost is only a issue as far as value other wise it doesn't matter I'm just looking to biuld my 1st system for fun but would like to be able to play most games
mavrick211
Gerbil
 
Posts: 27
Joined: Thu Dec 24, 2009 7:09 pm

Re: Samsung LED tv for monitor

Postposted on Tue Jan 12, 2010 11:45 pm

We need to know the form factor you're aiming for. A quiet HTPC or a regular mid-tower PC?
i5 2500K @ 4.5GHz / Cooler Master V8 / Asus P8P67 Evo / 8GB G.skill DDR3-1600 / MSI GTX 560 Ti / Seasonic S12-650 / 1TB Spinpoint F3 / Corsair 600T Graphite / those cheap 1440p Korean monitors
BoBzeBuilder
Graphmaster Gerbil
Gold subscriber
 
 
Posts: 1191
Joined: Tue Nov 08, 2005 8:43 pm
Location: Beerland

Re: Samsung LED tv for monitor

Postposted on Tue Jan 12, 2010 11:47 pm

Have you read the system guide?
http://www.techreport.com/articles.x/18042
JustAnEngineer
Gerbil God
Gold subscriber
 
 
Posts: 15427
Joined: Sat Jan 26, 2002 7:00 pm
Location: The Heart of Dixie

Re: Samsung LED tv for monitor

Postposted on Sat Jan 16, 2010 7:11 pm

yep ive read the system guide more than once from start to finish and will probably go with the double stuff high end model with a few changes like no solid state drives im looking for a high end biuld but not a noise monster not so high end that i have to put it in its own room with industrial air conditioning to keep it from over heating

my biggest questions are can i use my led tv as a monitor i believe i can and thing like whats the best networking card i have Wifi where i am so i need a network card with the strongest reception best reception i also believe in paying more for high end base component than normal
things like getting the obsidian tower for a case and a high end gigabyte motherboard i think i like Nvidia graphics cards better but i dont know why so ill probably buy a medium grade card and wait for them to come out with some thing new i dont play a lot of games but the game i will be playing the most would be flight sims and am looking forward to star trek online

also if i follow most of the guide lines for the biulds on this site than does that insure good possibility of components matching up
mavrick211
Gerbil
 
Posts: 27
Joined: Thu Dec 24, 2009 7:09 pm

Re: Samsung LED tv for monitor

Postposted on Thu May 16, 2013 1:56 am

I just bought a 32" Samsung LED TV (3d) to use as my new computer monitor. I'm having some problems:

My computer has become really slow and laggy with the monitor
The image just isn't as sharp at all. Like when searching on goolge i cant see the text clearly that under the search titles.
Running on a 1920x1080 resolution just makes the screen too big for the monitor (like it doesnt fit)

My specs are:

Core i7 2600K sandy Bridge
GTX 570
8GB ram

Im pretty sure its not my PC. Am i just using a really slow monitor of some sort? Or do i need to install some sort of drivers for this to work? My computer just feels really slow and laggy
Last edited by Kevin on Mon May 20, 2013 4:56 pm, edited 1 time in total.
Reason: EDIT BY MOD: Spam link in profile, user banned.
jorden
Gerbil In Training
 
Posts: 1
Joined: Thu May 16, 2013 1:47 am

Re: Samsung LED tv for monitor

Postposted on Thu May 16, 2013 2:53 am

Jorden, you are probably talking about overscan with the picture is too big for the monitor thing. Somewhere in the Nvidia control panel there should be a setting to adjust overscan settings.

As to your computer being really slow with the TV plugged in, are you using drivers from Nvidia's webpage or just what came with windows?

EDIT------

You should try downloading the latest drivers from Nvidia if you are not sure or know you're just using the windows ones.
odizzido
Gerbil
 
Posts: 61
Joined: Fri May 06, 2005 6:10 am

Re: Samsung LED tv for monitor

Postposted on Thu May 16, 2013 9:08 am

i have to review a lot of large scanned documents at work. it is typical for me to review a 250 scanned pdf of a legal filing. i got sick of reviewing it on my laptop so i plugged in a 32 LCD TV using a vga cable so i could read two pages at a time. i set the resolution to 1080 on my lenovo t420. i turned off the switchable graphics and just used the ati graphics card. i found the flicker or refresh rate was so bad on the monitor that i got a headache and felt nauseous. i suspect that cheap tv's do not make good monitors.

this will be my next monitor: http://www.microcenter.com/product/384780/EQ276W_27-Inch_IPS_LED_Monitor,_WQHD_2560x1440,_HDMI,_DVI-D,_DisplayPort,_USB
i7-930, GA-X58A-UD3R, Agility 2 240GB, 2 TB WD Black *2 mirror, ATI 5850 1 GB, 12GB (3*4GB)
hiro_pro
Gerbil
 
Posts: 62
Joined: Wed Feb 16, 2011 10:20 am
Location: DC

Re: Samsung LED tv for monitor

Postposted on Thu May 16, 2013 11:09 am

Jorden, I think your subjective feel of lag and sluggishness is due to the high input lag of the TV - I have personally experienced this myself. They simply weren't made with this usage in mind and therefore have significantly higher input lag compared to purpose-built monitors. As for the lack of sharpness - overscan is indeed the issue, search for an option of "Just Scan" or "Scan Only" or something similar in the TV settings, also search the Nvidia control panel for the same options. ;)
ASUS Rampage Formula|Q9550 3825MHz|4x2GB OCZ Reaper HPC 1066|GTX 460 1GB|ASUS Xonar DX|Intel SSD 330 180GB|5,5TB Storage
HP Elitebook 8530w|C2D T9900 3066MHz|2x4GB DDR2 800|Quadro FX 770M 512MB|Crucial C300 128GB + 750GB WD Black|15.4" 1920x1200
rado992
Gerbil
 
Posts: 24
Joined: Tue Aug 10, 2010 4:19 pm

Re: Samsung LED tv for monitor

Postposted on Thu May 16, 2013 2:02 pm

The obvious is to look for a "Game" mode for the input.
Arvald
Gerbil XP
Silver subscriber
 
 
Posts: 354
Joined: Tue Sep 27, 2011 12:14 pm
Location: Gerbil-land, Canada

Re: Samsung LED tv for monitor

Postposted on Fri May 17, 2013 3:49 am

hiro_pro wrote:i have to review a lot of large scanned documents at work. it is typical for me to review a 250 scanned pdf of a legal filing. i got sick of reviewing it on my laptop so i plugged in a 32 LCD TV using a vga cable so i could read two pages at a time. i set the resolution to 1080 on my lenovo t420. i turned off the switchable graphics and just used the ati graphics card. i found the flicker or refresh rate was so bad on the monitor that i got a headache and felt nauseous. i suspect that cheap tv's do not make good monitors.

this will be my next monitor: http://www.microcenter.com/product/384780/EQ276W_27-Inch_IPS_LED_Monitor,_WQHD_2560x1440,_HDMI,_DVI-D,_DisplayPort,_USB


TV's make great monitors, as long as you account for their limitations and have an applicable use case. Cheap TV's are usually better as well if you can get one with minimal processing. Keep the input lag down and calibrate the colors on the PC side and you're golden.
Canon 6D||[24-105/4L IS USM|100/2.8L Macro IS USM|70-300/4-5.6 IS USM|40/2.8 STM|50/1.4 USM|85/1.8 USM|Samyang/Bower 14/2.8 Full-Manual Rectilinear Wide-angle|
Canon EOS-M|11-22/4-5.6 IS STM|22/2 STM|EF-M 18-55/3.5-5.6 IS STM|
For sale!|24/2.8 IS USM
|
Airmantharp
Gerbil Elder
 
Posts: 5015
Joined: Fri Oct 15, 2004 10:41 pm

Re: Samsung LED tv for monitor

Postposted on Tue May 21, 2013 3:10 pm

Another thing I would recommend to anyone using a TV as a monitor is to be sure your TV will accept the resolution you want to use (go native!) at the correct refresh rate (normally 60hz for a TV).

I discovered this issue with my 32inch Panasonic "720p" TV. I randomly decided to check the specs on my TV and found that its native resolution is actually 1368 x 766. Great, I just got a "free" bump in resolution. However, when I went into Catalyst Control Center I found that the refresh rate would drop to 30hz when I upped the resolution to 766p over HDMI. A quick check of the manual showed that I needed to use VGA to get 766p at 60hz. Easily done. Now everything looks much crisper even though it was only a small bump in resolution.

Moral of the story is to check the TV's manual to be sure you can get the resolution you want at the refresh rate you want. Other than that, as other have said, turn on "Game" mode and disable any other post-processing stuff your TV may have to get the best results.
Gaming: i5-3570k/Z77 Extreme4/212 Evo/Corsair 500R/16GB Ballstix Tact 1600 CL8/MSI 7850 2GB/840 250gb, EVO 500gb, SG 3tb/Tachyon 550w/Win7

HTPC: i3 3225/H77/8gb g.skill 1.25v/1+2TB HDD/Asus BR/Asus 7850 2gb/Silverstone GD05B/Antec 380w/InfiniTV 4/Win7
southrncomfortjm
Gerbil Team Leader
Silver subscriber
 
 
Posts: 226
Joined: Mon Nov 12, 2012 7:57 pm


Return to System Builders Anonymous

Who is online

Users browsing this forum: No registered users and 1 guest