Captain Ned wrote:And if you want to assign specific IPs to specific devices, the router firmware will allow you to do same without having to do anything to the connected device. It's essentially a permanent DHCP lease tied to that MAC address.
anotherengineer wrote:Also in general for my connections, I have my main pc in port1, NAS in port2, printer in port 3 and 16-port switch in port 4. Should I give the NAS a permanent DHCP lease also? I think I did with the dlink.
anotherengineer wrote:Thanks Deanjo. Don't you have an rt-n66u? Where how do I do this on this router?
Deanjo wrote:anotherengineer wrote:Thanks Deanjo. Don't you have an rt-n66u? Where how do I do this on this router?
Yup, sure do have one.
On the right side under the "Advanced Settings" menu Click on LAN, then click on the tab on the top of the page that appears on the DHCP Server. Scroll down a bit and click yes where it says "Enable Manual Assignment". You should then get an option underneath it that says Manually Assigned IP around the DHCP list and that is where you can assign the manual assignments. (Hint, after entering the MAC address, IP address, Name hit the plus button before hitting apply on the bottom).
Users browsing this forum: AgnesAridly and 3 guests