Assembly tips

Building a new system? Need help choosing between parts? Then step in and let our trained gerbils assist you.

Moderator: JustAnEngineer

Assembly tips

Postposted on Mon Jul 25, 2005 9:03 am

Will be assembling this week. Any tips, suggestions?
Gerbil XP
Posts: 339
Joined: Mon Mar 01, 2004 2:02 pm

Postposted on Mon Jul 25, 2005 9:28 am

Touch the chasis to clear the static buildup. Keep movement to a minimum. Don't cut corners. Don't be afraid to read the manuals.
Corsair 600T | ASUS P8P67 PRO | Intel 2500k @ 4.4Ghz | EVGA 560 TI | G.SKILL Ripjaws Series 8GB | Corsair HX650 650W
Gerbilus Supremus
Posts: 11926
Joined: Mon May 26, 2003 5:55 am
Location: Pittsburgh PA

Postposted on Mon Jul 25, 2005 9:28 am

Well, be careful about static electrity - either ground yourself, or get one of those wristbands.

Also, when applying the thermal paste, make sure to put on a thin layer, don't do lots of goop.
Violence is the last refuge of the incompetent. The competent use violence well before last resorts are necessary.

If violence isn't solving your problems, then you aren't using enough of it.
Gerbil Elite
Posts: 907
Joined: Mon Apr 21, 2003 12:43 am
Location: R'lyeh

Postposted on Mon Jul 25, 2005 9:36 am

Drop in your CPU and attach your heatsink before you put the mobo in the case.
TR BBQ ~XI~ has come and gone but you can relive it by checking out this gallery!
Maximum Gerbil
Gold subscriber
Posts: 4560
Joined: Wed Jan 22, 2003 7:53 pm
Location: Zeeland, MI

Postposted on Mon Jul 25, 2005 9:50 am

Assemble/test the mobo/cpu/ram/psu/gpu outside the case to make sure they work.
Gerbil God
Posts: 21347
Joined: Thu Apr 01, 2004 4:53 pm
Location: Orlando, FL

Postposted on Mon Jul 25, 2005 10:11 am

The first amendment guarantees the freedom of assembly. Be sure to excercise it.

I'd suggest mounting the CPU and RAM to the motherboard before installing the motherboard. Less chance of slippage and breaking something in my experience. Also, once it's complete, take the time to zip-tie the power connectors you're not using...makes for a nice case layout, good airflow, and if you have a window, your case won't look like a damn rat's nest.

edit: drfish beat me to it (mostly)
I do not understand what I do. For what I want to do, I do not do. But what I hate, I do.
Gerbil God
Gold subscriber
Posts: 21775
Joined: Fri Feb 21, 2003 9:13 pm
Location: WHAT?

Postposted on Mon Jul 25, 2005 10:42 pm

Usacomp2k3 wrote:Assemble/test the mobo/cpu/ram/psu/gpu outside the case to make sure they work.

Thanks for all the advice guys, I appreciate it. I did go and buy the static strap today, though I've always gotten by without it before, I've more money than usual in this one, plus it's my first actual motherboard install. Also got some nice round cables for everything, and 120mm antec intake fan to go along with the 120 exhaust that comes with the antec case. Praying that's more than enough.

Usacomp, do you mean to assemble everything on the board, outside of the case, plug in the power, and test how? No test equipment here I'm afraid.
Gerbil XP
Posts: 339
Joined: Mon Mar 01, 2004 2:02 pm

Postposted on Mon Jul 25, 2005 10:53 pm

If you plug everything into the mobo while the mobo is outside of the case, you should be able to turn it on and run the computer without it being in the case. There's no law that says you need a case, it's just a very good idea :wink:

I personally do not assemble my comps outside of the cases first. Cases are so easy to work with nowadays that it's easier to remove/swap parts to troubleshoot a faulty component than it was back in the day.

Some additional advice: If you're fitting something into the case or onto the mobo and it's not fitting, don't force it. Take a step back and see if you're doing it right.
Sheep Rustlers in the sky! <S> Slapt | <S> FUI | Air Warrior II/III
Darth Gerbil
Gold subscriber
Posts: 7402
Joined: Sat Apr 24, 2004 7:53 pm
Location: the abyss into which you gaze

Postposted on Mon Jul 25, 2005 11:32 pm

Its really easy to miss a step or not plug somethin in..make sure you check all your connections carefully..then say 10 hail mary's..cross your fingers and push the eject button :lol:
Just an old sheepdog waiting for some nasty wolves to show...ive got more than enough teeth left.
Gerbil God
Posts: 24535
Joined: Sat Jan 19, 2002 7:00 pm
Location: Soap Lake, Wa

Return to System Builders Anonymous

Who is online

Users browsing this forum: No registered users and 4 guests