Personal computing discussed
Moderators: renee, farmpuma, just brew it!
Shinare wrote:Also, I also installed just the regular FAH client on my workstation Friday but it looks as though it is only using 1 core (my computer says %51 utilization right now). Can I tell it somewhere to use both cores?
Thanks again.
flybywire wrote:Shinare wrote:Also, I also installed just the regular FAH client on my workstation Friday but it looks as though it is only using 1 core (my computer says %51 utilization right now). Can I tell it somewhere to use both cores?
Thanks again.
If you're running the Win Console client, there's an option to run 'advanced configuration' during the fah configuration, choose 'yes' to enter 'advanced..'; under 'addition parameters', type '-smp' to enable multi-core.
Shinare wrote:Nope, will look at both. Thanks! Like I said, new to this.
...
Ack block 1685 ignored (received twice) [07/01 13:00:32.796]
Ack block 1685 ignored (received twice) [07/01 13:00:32.875]
Ack block 1685 ignored (received twice) [07/01 13:00:33.000]
Ack block 1685 ignored (received twice) [07/01 13:00:33.171]
Ack block 1685 ignored (received twice) [07/01 13:00:33.421]
Ack block 1685 ignored (received twice) [07/01 13:00:33.812]
Ack block 1685 ignored (received twice) [07/01 13:00:34.375]
Ack block 1685 ignored (received twice) [07/01 13:00:35.234]
Ack block 2659 ignored (received twice) [07/01 13:00:36.406]
Ack block 2659 ignored (received twice) [07/01 13:00:36.484]
Ack block 2659 ignored (received twice) [07/01 13:00:36.593]
Ack block 2659 ignored (received twice) [07/01 13:00:36.765]
Ack block 2659 ignored (received twice) [07/01 13:00:37.031]
...