TR Forums

What is the purpose of your computer? You could always do better, but that doesn't mean you did bad. If you use general computer, some gaming, and some video encoding, you'll probably be pretty happy. You also got pretty good value, don't forget that. It won't ever be the fastest computer out there...

Hey All, It's been a while since my last upgrade, and I think I made a mistake. I recently purchased the following setup/config (all currently en-route): AMD FX-6100 Zambezi 3.3GHz Socket AM3+ 95W Six-Core Desktop Processor FD6100WMGUSBX Sony Optiarc 24X DVD Burner, Bulk Package Black SATA Model AD-...

I'm considering upgrading my PC using an $100 amazon gift card I received from work. My specs are as follows: Antec 300 Gamers | P5N-E SLI | e6600 (Stock) | 2GB OCZ Plat. (Rev. 2) PC6400 4-4-4-12 2T | Gfx MSI 9800 GT OC | WD Raptor 74GB 10K RPM | Seagate 250GB 7.2K I was considering upgrading my RAM...

Thanks for the response. One quick question though. How much mileage are you getting out of the E6600? I hope I can OC to 3.0Ghz or over, but how long should expect the chip to last at that high of an OC?
I'm hoping to hold on to this CPU for another 1 -2 yrs.

Hello All, I'm planning on migrating my system to a new case, and was wondering if while in the process of cleaning my components of dust, should I also reapply the thermal paste on my CPU? I have an Artic 7 Cooler on my e6600 and used the stock silver paste that was attached to it. I have not had a...

I was wondering about the Antec 300 gamers case. I'm planning on overclocking my current rig and was wondering if this case would be a good option to go with. My Antec Sonata II has very limited airflow so I've been looking around for a reasonably priced/sized case with good airflow for a while. Doe...

I have not done much research on the 9600GT, I like the 8800GS for the price/performance ratio. Plus with the $30 rebate it's a steal.
I may just wait a while unitl the 9600GT price falls and pick up one of those once I look at some good benchmarks and comparisons.

I was wondering if this is a feasable plan. 1. I was going to purchase the xfx 8800GS: http://www.amazon.com/Geforce-8800GS-Pcie-384MB-2PORT/dp/B0012W1TSC/ref=pd_bbs_sr_1?ie=UTF8&s=electronics&qid=1206644226&sr=8-1 and the flash the BIOS with the xfx 8800GS XXX bios to get the factory OC...

I was wondering if this is a feasable plan. 1. I was going to purchase the xfx 8800GS: http://www.amazon.com/Geforce-8800GS-Pcie-384MB-2PORT/dp/B0012W1TSC/ref=pd_bbs_sr_1?ie=UTF8&s=electronics&qid=1206644226&sr=8-1 and the flash the BIOS with the xfx 8800GS XXX bios to get the factory OC...

I have a xfx 7900GS 600M it runs core: 600Mhz, RAM: 800Mhz effective: 1600Mhz.

I was wondering what kind of overclocking headroom I had with this card. I have a Zalman vf900-cu cooler on it that keeps
it will below 47C(load) 37C(idle).

I have the OCZ Plat Rev. 2, and I'm wondering if I will be able to keep my tight timings of 4-4-4-12 1T @ 800Mhz. My system specs should be in my sig. Would running in unlinked mode take care of this or is it best to run in linked and lower my RAM Freq. and loosing the timings and go from there. Thi...

I cut the Drive Rails out of the middle of the HD cage. These kept the Front mounted fan from sucking in a good amount of air. After cutting them out I could feel a very significant increase in air flow from the front of the case. If you have more than 2 HD's would not recommend doing this but with ...

Could you guys post your stock e6600 temps?
I just want to make sure mine are in specs.
I'm running @ 34c idle and 42c(max) under load with an Artic Freezer Pro.
My ambient temp ~22c

Thanks in advance

I added another 120mm Antec Tri Cool fan to the front of the case. I can feel a bit more air pulling in, but it does not seem to affect the over temp of the case. It does however cool the HDs better. ~(1c-2c). I did however add a mod to my case that made a big difference in my MB temp. I used the fa...

I just added a Zalman vf900-cu to my xfx 7900 GS XXX. My temps before (47c-52c) idle, and (62-65c) under load. After adding this cooler my idle temp dropped ~10c (37c-38c) and load (42-45c) this cooler is simply awesome. I added coolermaster HTK-002 thermal paste instead of the stuff that came from ...

I have an Antec Sonata II case and was wondering if anyone has had success increasing the airflow in this case. I have a 120mm Tri Cool rear exhaust fan (really kicks out air) and a front mounted 120mm Silent cool Fan(only goes to 1200 rpms ) :( . I did not install the air duct, but I did take the m...

Added my AC7 Pro and it knocked another 7c-9c of my temps. It's also a lot quieter than than the stock HS and Fan.

my mobo temp shows 35c and CPU 52C i had trouble with the fan supplied with the 6600 and wondering if this temp is ok guys thanks jim That CPU temp is pretty high! You should check to make sure your HeatSink is attached correctly. You may need to remove your MB from the case to do it properly. I kn...

I finally got my MB temps down. I made a small mod to my case a while back using the cooling tunnel provided with the Antec Sonata II case. I broke the back off and put an 80mm fan in the mount. I had removed this when I reset my heat sink as I did not realize it made such a difference as it points ...

My I checked the airflow in my case and it seems great. My cables are bundled at the top of the case. The issue with my CPU and core temps resolved by reseating the heatsink and fan, but now my MB temps are 7c-8c higher. My MB temps were at 32c-34c before reseating the heat sink. I've felt around my...

I took the advice of the post for reseating the heatsink. And my temps went from cpu (47c-50c idle to 38c-40c) core temps(62c,58c) ->(43c,42) It's a warm day and I don't have my AC running yet I had to take the MB out and force the black pins through the holes. I'm still looking forward to my artic ...

Since I have the coolmaster thermal paste on the way, should I add some to the heatsink of my grapx card. It's an xfx 7900 GS, which is OC'd 400Mhz->
600mhz by the manufacture. It idle's at about 48c-51c. Would there be any real benifit or should I just leave it be?

I recently upgraded to a intel e6600 core 2 duo. My specs are as follows: Antec Sonta II ( rear exhaust fan and front intake fan(sux)) MB : p5n-e sli Processor: e6600 ( stock cooling) Graphic Card: xfx 7900 gs xxx RAM: 1 Gb stick of Hynix ( the cosair's I bought did not work I'm only using these unt...

I Finally got my OC prime stable with the following settings: FSB 220 Multi x11 RAM divider 333 / 176.5 timings 2-3-3-8 - My question is, that I can get my RAM to run @ 220 "440" but only by loosing my timings to 2.5-3-3-8. Which is better? Tighter timings or more bandwidth. I plan on using this sys...

I've finally reached FSB @ 240 with to following settings FSB 240 Mulit x10 Divider 266mhz (333mhz fails @ stock voltage) timings SPD 2-2-2-6 1t (crucial ballistix 3200 ddr 400) vcore 1.38-1.4 or auto Ram volt 2.6 or auto Temps idle 29C Full Load(Both cores) 43-46C (depends on room temp) -----------...

I've attempted to oc my x2 4400 to 2.4 my fsb is stuck @ 230 with the following settings: FSB 230 Mulit x10 Divider 333mhz timings SPD 2-2-2-6 1t (crucial ballistix 3200 ddr 400) vcore 1.38-1.4 Ram volt 2.8 (auto) - it's prime stable at these settings but if I change to mulit to x10.5 or x11 - it fa...