TR Forums

sn_85

its set on admin. winxp must have diff format for its properties cuz that owner stuff aint comin up.

sn_85

Recently my motherboard died. And when you try to boot w/ the hard drive in another system it wont boot because of changed system configuration. So i put it as the secondary and tried to backup my files. i was successful in backing up some but some others not. this is because those were set up w/ pa...

sn_85

im new to scsi so this is a very basic question. whats the difference between 68pin scsi and 80pin scsi interfaces? is on better then other? and if i had 68pin scsi do i really need the 80pin scsi adapter. Thanks in advance.

sn_85

and when its booting up a there are a series of screens after the POST and the windows loading screen, like the one where it displays your IDE drives in white DOS, there are letters missing from some of the words.

sn_85

recently there have been problems with my WindowsXP. Before the computer would start lagging on start up and sometimes reboot itself after the black WinXP loading screen was done. the screen would flash with my cursor, then flash again and again. When i do successfully load WinXP the problems are st...

sn_85

recently my cpu temps went from 42C to 50C. i wondered why and for some reason the power supply fan doesnt work anymore. i have a TTGI 420W that i bought from Directron and it has two fans. one 80mm underside and the regular 80mm on the backside. the PSU has a three switch fan control. when i turn t...

sn_85

adding a 120mm fan adapter wont improve performance. plus the SLK800 doesnt have the usually screw holes for fans, its uses a clip mechanism which i dont know if it'll work with a fan adapter. get SLK800(A or U), whatever version u want, and a panaflo. they have a new 80mm thats 46cfm and 38dBA. rem...

sn_85

i wouldnt get the Swiftech pump. there have a been a lot of reports of it leaking. check overclockers.com forum and hardocp.com. ppl also say that after a few days its starts to make a loud rattling sound. this can be fixed by glueing the impeller to the shaft. the QPower is good if you dont want th...

sn_85

here is my setup right now Block: Dtek TC-4 Rad: HWLabs Black Ice Xtreme Chrome Pump: Eheim 1250 Res: none, T line fill for the block i recommend the TC-4. its the best commercial block there is. Cathars White Water Block is the best but he stopped producing his, but he has signed a contract with so...

sn_85

http://www.overclockercafe.com/Reviews/cooling/Tt_SubZero4G_P4/index.html at long last a review has finally come. it performed the way i expected it would, a tad better then air cooling. but those comparisons were between heatsinks that arent very well known for their cooling capabilities. had they ...

sn_85

in the BIOS set your first boot device as CDROM. just put the WinXP cd in the drive and it ask you questions whether or not you want to reformat. do what it says and you'll be okay.

sn_85

i recommend anything panaflo. loud, medium, quiet. they've got them all at good prices too.

sn_85

.....Mmmmm, I beg to differ. The GF4 Ti4600 will beat out the R8500 in more or less every benchmark by quite a large margine too. Here is an example of this. pattouk: coldfirex was saying out of the 3 choices that alaric listed to get the 8500. he didnt mean that the 8500 was better then the ti4600...

sn_85

they are hard at work in their garage soldering a new chip together. Its hard to make products when all they have is a $10 30W iron

SilverBullet im surprised u didnt know that was a Matrox Parhelia. i mean, doesn't your sig say you're from CANADA?

sn_85

NOLF2 is pretty cheap right now. about 25 to 30 bucks and it comes with a 10 dollar mail in rebate. and dont get CC:Generals. it was definitely swayed by ads. i think the boxes that IGN and Gamespot had money in them :D. the game is okay but the netcode is so terrible that its unplayable. There is n...

sn_85

http://www.frozencpu.com/cgi-bin/frozencpu/fan-40.html

sn_85

it depends on what part you're talking about. CPU, RAM or videocard. and on what type of CPU u have.

sn_85

sn_85

simply put its how much juice/power your component (cpu, ram, vidcard) is getting. the more the higher u can push the part but the less stable it will be.

sn_85

the back fan is drawing air from inside the PSU. thats why it is blowing air out. here is how the 2 fan PSU works. air is drawn intot the PSU by the 92mm fan. this air goes over the heatsinks inside the PSU and cools it. the air that cooled the heatsinks of the PSU is now being sucked out of the ent...

sn_85

man ur confusing me :D . anywho, as long as the air from the 92mm(bottom) is sucking in then it's correct. The side vents are meant for air to come in but u describe it as coming out. still with the 80mm(backplate) sucking air out, the bulk of hot air is still exiting your computer. Its not as thoug...

sn_85

Yeah, and look at the Kyro2's asstastic max fillrate! It's all about balanced design... I can whip you up a core with 50 gigatexels of max fillrate... Without the ram bandwidth and shader power to back that, it's nothing but a renderer which will be idle 99.999% of the time. yeah but the KyroII use...

sn_85

actually i think you should return it because i've never heard of any PSU manufacturer who blow air back in the case. it's probably a special case with your PSU. Either return it or open the PSU up and flip the fan around.

sn_85

are you buying this for gaming? cuz the nForce2 would be a better option or waiting a couple of weeks for the KT400A. the KT400 is little dated now. You don't need 5 case fans unless you're shooting for orbit or trying to get that extra 15 MHz out of your CPU. On that note, 430W PSU is overkill for ...

sn_85

with impending releases of new mainstream video cards it making things look attractive pricewise. most places have the 128MB 9500 out of stock because most are buying and using the softmod9700. problem is that ATI and affiliates are now putting the newer versions through circulation and the softmod9...

sn_85

chances are unlikely cuz i have the same combo. you say you know its loud but have you ever heard it in real life? you know its loud but can you stand it for a long duration? i got a rheobus with mine but it was still loud when i turned it down because they have loud bearings. after that i ripped it...

sn_85

im building a computer for my friend and its my first Intel machine i've built. im a AMD kinda guy. everything has been smooth except when i first installed the Intel INF Driver. When it installed the color on the monitor became washed out in blue and pink and when i restarted black bands stretching...

sn_85

i think the Miracle Blade III outta do it :D . if you know someone or have a drill press then get a whole saw with it. i guess u could get someone at a machine shop to laser cut it but that might be expensive. i think the whole saw kit is around 30 bucks for 114mm, i think. and if you dont like the ...

sn_85

http://www.newegg.com/app/viewproduct.a ... 119&DEPA=1

good deal

sn_85

goto to this database to see how far it can go

http://www.cpudatabase.com/CPUdb/

TR Forums

Search found 68 matches

Hard Drive will not work on other comps

68pin SCSI vs. 80pin SCSI

WinXP errors

Powersupply fan not working

Thermaltake SubZero4G P4 review

9500 modded to 9700, still works?

do i need the Intel INF Driver?