TR Forums

So try them both, see which one YOU prefer, return whichever you don't like. Problem solved. Unfortunately there is no store within an hour of me that sells the MMO7.... so thats out of the picture. Also I think Im going to try the M.M.O 7 simply because I already tried the RAT 7 and loved it, didn...

I was wondering which Saitek Cyborg I should get. Should I get the M.M.O 7 http://www.ncix.com/products/?sku=73326&vpn=CCB437130002%2F04%2F1&manufacture=Saitek&promoid=1360 or the White R.A.T 7 http://www.ncix.com/products/?sku=65689&vpn=CCB437080001%2F04%2F1&manufacture=Saitek&a...

Yes. You can have two monitors combined into an Eyefinity group and have the third one not associated, assuming that the first two monitors have the same resolution and orientation. http://www.amd.com/us/products/technologies/amd-eyefinity-technology/Pages/eyefinity.aspx Thanks, looks like all I ne...

JustAnEngineer wrote:

Consider a pair of 8 GiB DIMMs rather than four 4 GiB DIMMs.

Such as...

I have $150 to spend at http://www.newegg.ca I have a few things in mind, either 2 of these http://www.newegg.ca/Product/Product.aspx?Item=N82E16820145345 , 2 of these http://www.newegg.ca/Product/Product.aspx?Item=N82E16820231479 or this case http://www.newegg.ca/Product/Product.aspx?Item=N82E16811...

If you're going to use Eyefinity to stretch your gaming screen across all three monitors, they must all have the same resolution and orientation. If you're just going to have a multi-monitor display with the game on one and various web browsers, spread sheets, etc open on the Windows desktop on the...

I have been trying to do research on the best Graphics Card to get for a triple monitor setup. Im not looking to spend more than $500 Canadian on it. What I am planning on doing with it is playing Guild Wars 2 with the main (middle) screen being the "play" screen, one of the side ones to h...

And airflow might only be marginally better for a full size case depending on fans and where things are located. However, if it just ends up with a lot of empty space inside, the case is just kinda taking up space. Smaller cases are easier to deal with and give you more options with setting up your...

Should I remind you again the OP is limited to a $1400 Canadian budget count a whooping 12% Tax?? The either the SSD have to go or you have to down grade the graphic card to make room for the H100(this, not drives is the reason OP think he needs a full tower, however Some mid tower like the Corsair...

After further gaming in Crysis 2 and Age of Mythology I found I only lifted occasionally, mainly because I hit the end of my mouse pad. The only real problem I have with it so far is that the main plate on the bottom doesnt go to the very back of the mouse, making it so that if you rest your palm on...

Just bought a Cyborg R.A.T 7 and initial thoughts are that I think I wont be lifting this mouse very often or to at all, you can make it heavy enough that it discourages that automatic feeling to lift. I will post again after I actually game for a couple of hours

AlexGP wrote:

Do you even lift?

.... yes... that is the ENTIRE point of the thread. Because I lift, I kill mice faster then people who dont. Did you even read anything in the thread?

Bensam123 wrote:

The Taipi I have has a adjustable lifting height. You can setup custom surfaces.

Umm, I think you may have the name wrong or something because I googled it and couldnt find anything resembling a mouse. I am interested so please get back to me on it!

sherlock wrote:

Thor V2 imo is one of the cheapest Full towers priced at $139 Canadian and you get 3 230mm fan & 1 140mm fan, it have been rated as one of the best Air Cooling Cases.

Thanks for that suggestion! Not a bad lookin case either. The H100 should mount right there on the back were that grate is.

If you're physically damaging the mouse I would call that 'smashing' not 'lifting' :P I'm not smashing it at all, I am very gentle lifting and putting down, but its just the nature of it hitting the pad over and over again that can damage it over time. My friend suggested a Corsair M90, but I dunno...

I am looking into cheaper full towers (under $200 Canadian, including 12% tax). I have a very small list of requirements for it Must look cool ie: COOLER MASTER HAF 932 Must have a place to mount a water cooling system (probably an H100 but maybe an H80) Must be a Full tower Hope you people can help...

I have decided that, since boxing day is only like 4 months away, I will hold off and just get everything on sale, that way i can get even better stuff, and have a bit more money for it all.

I'm not sure I completely understand the "lifting" problem... The lifting problem means that I lift the mouse off the mousepad and attempt to have my arm sitting in a straight position when I finish the swipe. Basically it means that I wreck mouses faster then most other people who dont l...

Hello people, I have been looking into getting a good gaming mouse but I have discovered a problem on my end... Im a lifter, meaning when I use the mouse, instead of leaving it flat on the mousepad at all times, I lift it so that I can keep my arm in a central position. Ive heard of people have HUGE...

OK so your budget is 1400/1.12= 1250 Candian Dollars, I will base it off my build and look for items on newegg.ca(in Canadian Dollars), ncix might be cheaper but I never used that site before. Processor : Intel Core i5-3570K 3.4GHz $235 Memory : G.Skill Ares F3-1600C8D-8GAB(2X4) 8G $43.99 (16G is o...

My friend helped me build this, on newegg.ca Intel Core i5-3570k $234.99 Cooler Master HAF 932 $113.99 (It was combo'ed with the ram) G.Skill Ripjaws Series 16GB (4 x 4GB) $90.99 2x Seagate Barracuda ST3750525AS 750GB 7200RPM SATA 6GB Internal $139.98 for both Sapphire Radeon HD 7870 GHz Edition 2GB...

First off: The R4 is a bland ass case, not what im looking for at all, the corsair is also bland as hell, same as the FT-02... I did say I wanted it to look cool right? I prefer a tower that looks cool, but thats not a requirement . I believe the gerbils looked at this and suggested functional case...

It's quite a bit more than the Define R4 and P280, though. If you're going to spend money, might as well get a Silverstone Fortress FT-02 and do it right the first time. The 550D is only $35 more than the R4 while the FT02B is $145 more than the R4. That is a massive difference. The FT02B is an awk...

$230 Intel Core i5-3570K $155 -20MIR Asus P8Z77-V LK $156 2x8 GiB PC3-14900 Corsair Vengeance CMZ16GX3M2A1866C10R (DDR3-1866, CAS 10, 1.5 V) or $111 2x8 GiB G.Skill F3-1600C9D-16GSR (DDR3-1600, CAS 9, 1.5 V) $240 256 GB Samsung 830 or $120 128 GB Samsung 830 $120 2 TB Seagate ST2000DM001 $70 LG CH1...

Yes, but still not enough to make me want one unless I already had an AM3+ motherboard on hand (which is unlikely since the only reason to buy an AM3+ motherboard is to run Bulldozer). If they drop the price again by a similar amount, I will start seriously considering it for new builds. A FX-8150 ...

My budget is $1400 CANADIAN (With taxes, taxes are 12%) (preferably less but I will go higher for the right equipment) Must have: i5-3570k Full tower (with spot for water cooling) Corsair H100 water cooling system I prefer a tower that looks cool, but thats not a requirement. Multi-Screen GPU would ...