Personal computing discussed

Moderators: Flying Fox, morphine

Topic Author
Posts: 24
Joined: Fri Dec 28, 2001 7:00 pm
Location: Melbourne Australia

Mon Feb 04, 2002 8:22 am

Are there any issues with the temp monitoring with the MSI nForce board. I just have a new system and when I ran the PC Alert it started screaming that the temps where too high. It gives a CPU temp of 67C and a case temp of 37C these are at idle. Removing the side of the case made no change.
Any ideas?

Posts: 28
Joined: Sat Feb 02, 2002 7:00 pm

Mon Feb 04, 2002 10:43 am

I am not familiar with that board, but would reseat the heatsink if I were you. Make sure it is not cocked or uneven and that it makes good contact with the core (no gap) and has proper thermal grease applied.
VapoChill/XP Pro OS
XP2000+ 1942mhz=155x12.5
AbitKR7A /2x256 2.2.2. Mushkin PC2100/DDRHP
Plextor16xCDRW / PioneerDVD
100GB WesternDigital SpecialEdition7200HDD
Turtle Beach Sound
Channel Well 420PSU
Posts: 6581
Joined: Thu Dec 27, 2001 7:00 pm
Location: Minneapolis, MN

Mon Feb 04, 2002 10:37 pm

Try something like Motherboard Monitor, which you can grab here: And as mentioned above, make sure that the thermal grease is applied properly. Also, is the CPU fan on? :wink:
Being right doesn't matter if no one listens.

Who is online

Users browsing this forum: No registered users and 2 guests