Page 1 of 1
ITX <=>MICRO AT MOBO?
Posted: Sun Oct 07, 2012 12:35 pm
by bretontm
The DORM ROOM System MOBO is not available. Is the 'ASRock H67M-GE/HT (B3) LGA 1155 Intel H67 HDMI SATA 6Gb/s USB 3.0 Micro ATX Intel Motherboard (NEWEGG)' a compatible form-factor or size that will fit in the SILVERSTONE SG05-450 Case.
I would like to confirm the Motherboard 'ASRock H67M-GE/HT (B3) LGA 1155 Intel H67 HDMI SATA 6Gb/s USB 3.0 Micro ATX Intel Motherboard Specifications (NEWEGG) that this motherboard is compatible with the SILVERSTONE SG05-450 Case?
Thanks
Re: ITX <=>MICRO AT MOBO?
Posted: Sun Oct 07, 2012 2:49 pm
by DPete27
Nope, mITX only. The case does NOT support microATX.
Re: ITX <=>MICRO AT MOBO?
Posted: Sun Oct 07, 2012 6:07 pm
by JustAnEngineer
For Micro-ATX, you want the Silverstone SG02B or SG01B case.
If you're looking for another Mini-ITX motherboard to go into the SG05, how about these?
$100 Asus P8H77-I
$107 ASRock H77M-ITX
$136 Gigabyte GA-Z77N-WiFi
Re: ITX <=>MICRO AT MOBO?
Posted: Mon Oct 08, 2012 2:26 pm
by bretontm
Zum Alles:
Viel Dank fur die Antworten. particulalry 'JustanEngineer' for alternate MOBO. NEWEGG Order Display says the AsRock Board is out of stock, but NEWEGG shipped me an AsRock H67M-ITX MOBO for $95. Also, SILVERSTONE Tech Spt also confirmed, I would specifically need an ITX MOBO for the case. So, I'll see how it all goes together, soon.
Bis Spaeter
Bretontm
Re: ITX <=>MICRO AT MOBO?
Posted: Mon Oct 08, 2012 3:41 pm
by DPete27
What CPU are you planning on throwing in there? Ivy Bridge CPUs are only supported with
BIOS version 2.10 and 2.20. If you put an Ivy Bridge processor in there and it doesn't boot up, that's the reason. You'll need to borrow a Sandy Bridge processor so that you can boot up and flash the BIOS.