Still figuring this new pc out...
At Stock the idle is ".8" volts.
Gigabyte X399 Designare EX motherboard.
But the voltage may spike to 1.48 volts in the bios read out.
And CPUz. (bios at AUTO)
Really do not want that at all.
But once I SET the cpu voltage to...say 1.225 in the bios, the voltage
spikes stop but so does the idle ".8" volts...stays at around 1.225.
And then I've read that a lot of the "software" readouts can be flaky.
I want the low voltage with out the high spikes.
(But most important is stopping the 1.4+ voltages.)
Thanks