I was planning to purchase G. Skill RAM kit model F4-2666C19D-16GIS that has the following specs:
16GB (8x2)
DDR4
2666MHz
19-19-19-43
SPD & tested voltage are both 1.2
However I can get the 3000MHz model (F4-3000C16D-16GISB) for the exact same price. Different specs:
Tested latency: 16-18-18-38
SPD speed: 2133MHz
SPD voltage: 1.2 (same)
Tested Voltage is 1.35
2666MHz is the highest I can go with my CPU, but since they are the same price I figured I'd go with the 3000MHz for some future proofing. E.g. if I upgrade my CPU in the future I can then take advantage of faster speed and better latency–was my thinking at first. Now however I'm concerned that since my CPU doesn't support the full capacity of the kit that I will only be able to use it's SPD specs which are worse than the 2666MHz kit. So I figured I'd ask here to see if that would be the case. I'd actually prefer the lower SPD voltage but I don't want to run at 2133MHZ, and I'm also concerned that the latency would be even worse than the 2666MHz kit.