Phenom II X4 965 BE
Posted: Tue Dec 28, 2010 11:43 pm
I am trying to OC as far as possible without messing too much with the voltage. 12hours of Prime95 is my base for stability.
Board: ASUS M4A89GTD PRO/USB3 - AM3
HDD: Western Digital Caviar Black 1 TB
PSU: Antec EarthWatts EA750 750W
Mem: Mushkin Enhanced Silverline (2 x 2GB) DDR3 1600 (PC3 12800) 1.65v
CAS:7 tCL: 7 tRCD: 10 tRP: 10 tRAS: 24
CPU: AMD Phenom II X4 965 BE 3.4 (200x17) 125W
Passed: Test (235x17) = 3.995 with the RAM at DDR3: 1333MHz and NB set to auto
Passed: Test (211x18) = 3.798
Passed: Test (200x19) = 3.8
Passed: Test (203x19) = 3.857
Failed: (204x19) = 3.876 Loaded Win 7, but did not pass test.
I was reading on here somewhere about the value of raising your NB, so I began modifying that variable.
The system passed/failed on the same settings whether the NB is set @2400 or @2600.
Final OC?
Stable at the following...
CPU: 203x19 = 3857MHz
NB@ 2657MHz
DDR: 1624MHz
This is air cooled, no adjustments to voltage. Recomendations, or should I be happy with this?
Board: ASUS M4A89GTD PRO/USB3 - AM3
HDD: Western Digital Caviar Black 1 TB
PSU: Antec EarthWatts EA750 750W
Mem: Mushkin Enhanced Silverline (2 x 2GB) DDR3 1600 (PC3 12800) 1.65v
CAS:7 tCL: 7 tRCD: 10 tRP: 10 tRAS: 24
CPU: AMD Phenom II X4 965 BE 3.4 (200x17) 125W
Passed: Test (235x17) = 3.995 with the RAM at DDR3: 1333MHz and NB set to auto
Passed: Test (211x18) = 3.798
Passed: Test (200x19) = 3.8
Passed: Test (203x19) = 3.857
Failed: (204x19) = 3.876 Loaded Win 7, but did not pass test.
I was reading on here somewhere about the value of raising your NB, so I began modifying that variable.
The system passed/failed on the same settings whether the NB is set @2400 or @2600.
Final OC?
Stable at the following...
CPU: 203x19 = 3857MHz
NB@ 2657MHz
DDR: 1624MHz
This is air cooled, no adjustments to voltage. Recomendations, or should I be happy with this?