I'm pulling way under where I should be on my RX Vega 56, around 300k, haven't had the time to figure out why. Client v. 7.5.1, driver v 18.9.2, clocks staying above 1.5 GHz
The Windows 10 install to the other machine won't let the BD drive work, so the RX 580 is still in the parts box
Edit 2 hours later: it was stupid and my fault. I'd been letting the CPU folding slot run. This was an advantage last time I ran FAH, though that was with 7.4.4 and I have since turned off HT on the CPU.
My PPD was looking okay when I fired up the afterburners for TRFrankenbot, so it is either that I didn't let it bed in long enough to notice the poor performance, or that some CPU workloads are now sufficiently taxing that they compromise the machine's ability to run the GPU slot workload, so much so that total PPD takes a hit of 30-50%
FWIW, this box has 32 GB RAM, not sure if that means it might get some bigger memory jobs or not.
Desktop: E3-1270 v5, X11SAT-F, 32GB, RX 580, 500GB Crucial P1, 250GB Crucial MX500, 4TB 7E8, Xonar DGX, XL2730Z + L22e-20
HTPC: i5-2500K, DH67GD, 6GB, GT 1030, 250GB MX500, 1.5TB Barracuda, Xonar DX, G2420HDB