Personal computing discussed

Moderators: morphine, SecretSquirrel

 
Sunburn74
Gerbil Team Leader
Topic Author
Posts: 280
Joined: Wed Feb 11, 2009 1:45 am

Undervolting GPU

Tue Jun 07, 2011 11:43 pm

I have a gtx 570 and I'm interested in undervolting. How would I go about undertaking such an endeavour?
i7 2600k @4.4 ghz 1.26v - GA-P67X-UD3 - 16gb Corsair Vengeance DDR3 1600mhz - Evga Geforce GTX 570 - 2x 120gb Vertex 3 Raid-0 - Seagate Barracude 1.5TB - Silverstone FT02- HP 2709M Monitor
 
Sunburn74
Gerbil Team Leader
Topic Author
Posts: 280
Joined: Wed Feb 11, 2009 1:45 am

Re: Undervolting GPU

Wed Jun 08, 2011 9:20 am

No one can give advice on how to underclock a gpu successfully?
i7 2600k @4.4 ghz 1.26v - GA-P67X-UD3 - 16gb Corsair Vengeance DDR3 1600mhz - Evga Geforce GTX 570 - 2x 120gb Vertex 3 Raid-0 - Seagate Barracude 1.5TB - Silverstone FT02- HP 2709M Monitor
 
mmmmmdonuts21
Gerbil Elite
Posts: 593
Joined: Wed Jul 16, 2008 9:09 am

Re: Undervolting GPU

Wed Jun 08, 2011 12:16 pm

Try Rivatuner. I have used it before but to overvolt. Not sure if it will undervolt or not.
To Start Press Any Key'. Where's the ANY key?
If something's hard to do, then it's not worth doing
You know, boys, a nuclear reactor is a lot like a woman. You just have to read the manual and press the right buttons.
 
Crayon Shin Chan
Minister of Gerbil Affairs
Posts: 2294
Joined: Fri Sep 06, 2002 11:14 am
Location: Malaysia
Contact:

Re: Undervolting GPU

Mon Jun 13, 2011 5:40 am

Isn't Rivatuner a bit outdated, stuck at 2.24c? That's 2 years ago!
Mothership: Thuban 1055T@3.7GHz, 12GB DDR3, M5A99X EVO, GTX470+Icy Vision Rev.2@840/3800, Vertex 2E 60GB
Supply ship: Sargas@2.8GHz, 12GB DDR3, M4A88TD-V EVO/USB3
Corsair: Macbook Air Ivy Bridge
 
Jigar
Maximum Gerbil
Posts: 4828
Joined: Tue Mar 07, 2006 4:00 pm
Contact:

Re: Undervolting GPU

Mon Jun 13, 2011 5:47 am

Sunburn74 wrote:
I have a gtx 570 and I'm interested in undervolting. How would I go about undertaking such an endeavour?


Use Afterburn, it will let you undervolt your GPU.

NOTE: I have tried that on my card (See sig) and it is not advisable, because FPS will drop considerably.

EDIT: Ok, if you want to make a non gaming profile than it's a different story all together. Here you can create a power saving profile using Afterburn, where you can undervolt the GPU considerably and also downclock your GPU, this profile is safe to use for watching movies and other 2 D tasks. Also you can create a auto fan profile which can help further to keep the temps down.

Hope this helps.
Image
 
trek205
Gerbil In Training
Posts: 2
Joined: Fri Sep 19, 2008 6:25 am

Re: Undervolting GPU

Sun Oct 30, 2011 4:46 pm

Jigar wrote:
Sunburn74 wrote:
I have a gtx 570 and I'm interested in undervolting. How would I go about undertaking such an endeavour?


Use Afterburn, it will let you undervolt your GPU.

NOTE: I have tried that on my card (See sig) and it is not advisable, because FPS will drop considerably.

EDIT: Ok, if you want to make a non gaming profile than it's a different story all together. Here you can create a power saving profile using Afterburn, where you can undervolt the GPU considerably and also downclock your GPU, this profile is safe to use for watching movies and other 2 D tasks. Also you can create a auto fan profile which can help further to keep the temps down.

Hope this helps.
hate to dig up an old thread but I was looking around the web to see if if anybody was undervolting their gtx570 and came across it. what you just said about fps dropping from undervolting makes no sense at all. if the clocks remain the same then the voltage being lowered has NO impact on framerates.

my stock gtx570 voltage is 1.013 but it does not oc worth a crap without a voltage bump so I got a different plan. I wanted to see how low the voltage could go at stock clocks and I was a little surprised. using Afterburner, I went down one increment at a time and finally when I got to .950 it become slightly unstable towards the end of 3DMark11. the next step up is .963 and was perfectly stable at that speed even after loops of numerous game benchmarks. I decided on .975 though just to make sure there wound not be any stability issues at all.

temps only hit 71 for a max in all the benchmarks while I was at .963 so .975 should not be more than 1-2 C difference. I think I will just leave it at stock clocks and .975 for good instead of even fooling with overclocking it.

Who is online

Users browsing this forum: No registered users and 1 guest