Personal computing discussed

Moderator: JustAnEngineer

Gerbil XP
Topic Author
Posts: 369
Joined: Sun Aug 24, 2008 5:07 pm

New Build

Sun Dec 11, 2011 11:52 pm

I am back, I came here a few years ago and you guys helped me build my core 2 quad machine. Now I want to build another. My budget is around $1,000 USD. I am using my old HDDs (got a new ssd vertex 3 as of a week ago). Here is what I am looking at. A lot has changed since I built my computer and im looking for any tips/suggestions on any changes. I do want to overclock, not sure if you can/need to overclock memory anymore, to overclock the cpu?

Core i5-2500k 3.3 ... 6819115072

Corsair 600T White ... 6811139005

Gigabyte GA-Z68X-UD3H-B3 ... 6813128498

Corsair Veng 8GB ... 6820145345

EVGA GTX 560 Ti ... 6814130610

Seasonic 520W ... 6817151093

I only took seasonic because it was on the christmas system list. I think I would maybe like a corsair? Modular.

Total: $926

I am also looking for a CPU cooler, either a fan or a "all in one" water cooler, like the H60/80/90 etc...
Grand Gerbil Poohbah
Posts: 3249
Joined: Sat Nov 25, 2006 3:21 pm
Location: Kansas

Re: New Build

Mon Dec 12, 2011 12:00 am

No need for overclocked memory. That CPU has an unlocked multiplier you can change at will to increase or decrease clock speed. I've had good luck with my CM Hyper 212 on S1156. Here is the revised version.

Personally I'd go with an ASUS board. Same price and you get better BIOS features and fan control.

You'll be paying a lot more for a Corsair modular PSU. I'd stick with a solid 500-600W wired unit like the one you have listed.
i7 6700K - Z170 - 16GiB DDR4 - GTX 1080 - 512GB SSD - 256GB SSD - 500GB SSD - 3TB HDD- 27" IPS G-sync - Win10 Pro x64 - Ubuntu/Mint x64 :: 2015 13" rMBP Sierra :: Canon EOS 80D/Sony RX100
Gerbil First Class
Posts: 138
Joined: Sat Sep 19, 2009 12:48 am
Location: The Enn See Arrr, Central-Eastern Canuckisthan.

Re: New Build

Mon Dec 12, 2011 12:36 am

Are you totally set on that case? $170 is a good chunk of change. Fractal Design and Antec, for instance, have cheaper cases with competitive features (Define R3, Antec P280).
i5-750 @ 3.3 GHz; Asus P7P55D-E Pro; Thermalright Silver Arrow; Antec P183; 4 GB; 2x Radeon HD 6950; Corsair HX650.
Gold subscriber
Gerbil God
Posts: 23914
Joined: Fri Feb 21, 2003 9:13 pm
Location: Comin' to you directly from the Mothership

Re: New Build

Mon Dec 12, 2011 7:54 am

Hardware-wise, you've got a great setup chosen. Z68, an unlocked processor, and a 560Ti will be super-fast. You might be able to save a couple bucks on slightly slower RAM, but probably not more than $10, so I'm not going to worry about it. The PSU should be plenty for this system, though since your mobo supports SLI there's a chance you may want more PSU if you decide to go that way down the road.

That aside, my personal preference would be an ASUS Z68 board such as this P8Z68-V/GEN3 because ASUS has superior fan speed controls and a nicer UEFI interface. The Gigabyte will be fine, but the ASUS will keep it quieter. At the same price as the Gigabyte, ASUS has a plain P8Z68-V with no gen-3 PCI-express slots. Not sure how much of a difference that will make in the next 3-4 years anyhow, because gen3 PCIe cards have to exist before it's useful. Both of these choices also support SLI.

For a cooler, I have a CoolerMaster Hyper 212+ as Dancin Jack does, and it has done a great job keeping cool and doing so quietly. There's a Hyper 212 EVO that's a couple bucks more than the standard Hyper 212+, and the difference is the base is supposedly much flatter for better CPU contact. At $8 it's not a TON more, but it is a bit more.
I do not understand what I do. For what I want to do I do not do, but what I hate I do.
Gerbil Jedi
Posts: 1899
Joined: Fri Aug 20, 2010 6:03 pm
Location: philly suburbs

Re: New Build

Mon Dec 12, 2011 7:58 am

You might want to get a MB with proper dual pcie 16x slots that will run in 8x8 mode and not 16x4...perhaps a ud4.
2600k@4848mhz @1.4v CM Nepton40XL 16gb Ram 2x EVGA GTX770 4gb Classified cards in SLI@1280mhz Stock boost on a GAP67-UD4-B3, SBlaster Z powered by TX-850 PSU pushing a 34" LG 21/9 3440-1440 IPS panel. Pieced together 2.1 sound system

Who is online

Users browsing this forum: simbant and 3 guests