Personal computing discussed

Moderators: Steel, notfred

 
Maxwel
Gerbil
Topic Author
Posts: 13
Joined: Tue Dec 24, 2002 8:25 am

Dynamic DHCP doesn't work for WinXP

Sun Sep 09, 2012 5:01 pm

I'm switching from static to dynamic DHCP - using a D-Link ebr-2310 router. No problem with 3 Win7 boxes. All but one WinXP box will not acquire network address. They will work statically. I pulled a Win2k box out of storage and it worked. Any ideas?
 
just brew it!
Gold subscriber
Administrator
Posts: 47516
Joined: Tue Aug 20, 2002 10:51 pm
Location: Somewhere, having a beer

Re: Dynamic DHCP doesn't work for WinXP

Sun Sep 09, 2012 6:44 pm

Try temporarily disabling any software firewalls. Perhaps the DHCP port is being blocked.
If the world isn't making sense to you, you're either drinking too much or not drinking enough.
 
Ryu Connor
Gold subscriber
Global Moderator
Posts: 4153
Joined: Thu Dec 27, 2001 7:00 pm
Location: Marietta, GA
Contact:

Re: Dynamic DHCP doesn't work for WinXP

Sun Sep 09, 2012 7:16 pm

UDP port 67 and 68 are used by DHCP.
"Welcome back my friends to the show that never ends. We're so glad you could attend. Come inside! Come inside!"
 
streagle27
Gerbil
Posts: 42
Joined: Tue Dec 27, 2005 11:16 pm

Re: Dynamic DHCP doesn't work for WinXP

Sun Sep 09, 2012 10:58 pm

Did you try stopping then starting the DHCP service?

Also, the TCP/IP stack might be corrupt.

http://support.microsoft.com/kb/299357
 
Maxwel
Gerbil
Topic Author
Posts: 13
Joined: Tue Dec 24, 2002 8:25 am

Re: Dynamic DHCP doesn't work for WinXP

Mon Sep 10, 2012 10:28 am

In Windows Services, DHCP Client was set to Manual not Auto for the XP boxes save 1. Setting to Auto fixed them.

Who is online

Users browsing this forum: No registered users and 0 guests