Personal computing discussed

Moderator: JustAnEngineer

 
Sikthskies
Gerbil Elite
Topic Author
Posts: 789
Joined: Mon Dec 11, 2006 9:54 am
Location: England

When doing a large upgrade (mobo, ram, processor, gfx)...

Tue Jan 22, 2013 7:41 am

When doing a large upgrade (mobo, ram, processor, gfx)...

How do you go about retaining the drive letters of your individual drives so that when you boot up again, everything still works as it did?

Does each drive automatically retain its assigned letter, so you just put them in any SATA port and it works?

Never done a new install and not reinstalled windows, but it's running fine and I've got far too much to reinstall!!
Q6600|Asus P5b Deluxe|Corsair VX550|4gb Cell Shock 6400|4890|320gb Seagate|Zalman 9700|2407WFP
 
FireGryphon
Darth Gerbil
Posts: 7489
Joined: Sat Apr 24, 2004 7:53 pm
Location: the abyss into which you gaze

Re: When doing a large upgrade (mobo, ram, processor, gfx)..

Tue Jan 22, 2013 7:57 am

Assuming Windows lets you do it without requiring a new registration key, just plug in the drives into the SATA ports in the same order they were pre-upgrade. You can always manually reassign drive letters if necessary, too.
Sheep Rustlers in the sky! <S> Slapt | <S> FUI | Air Warrior II/III
 
ludi
Emperor Gerbilius I
Posts: 6355
Joined: Fri Jun 21, 2002 10:47 pm
Location: Sunny Colorado front range

Re: When doing a large upgrade (mobo, ram, processor, gfx)..

Tue Jan 22, 2013 11:20 am

If you're upgrading that much at once, bite the bullet and plan enough time to do a proper reinstall. Windows can handle in-place upgrades of memory and most peripheral cards, but once the mainboard and CPU are changed out, all bets are off, and you may end up with a marginally-stable mess.
Abacus Model 2.5 | Quad-Row FX with 256 Cherry Red Slider Beads | Applewood Frame | Water Cooling by Brita Filtration

Who is online

Users browsing this forum: Glorious and 4 guests