Single page Print

Building a basic gaming PC with AMD's Ryzen 3 2200G

Raven without a cause

As my friends know, I have a peculiar fondness for testing the limits of low-grade hardware. For that reason, when AMD's Ryzen processors with Radeon Vega Graphics—better known as "the Ryzen APUs"—finally hit the market I was pretty eager to pick one up and play with it. Budget constraints left me unable to do so until just recently. One of my friends ended up with a spare Ryzen 3 2200G that she passed on to me to play with.

While I certainly appreciated the gesture, it seemed a bit of a waste at the time. I didn't have a motherboard to put it in, nor any RAM to use with it even if I did. DDR4 was (and is) still prohibitively expensive. Plus, I didn't want to buy cheapo low-speed RAM for use with an APU. Even though I had the rest of the parts, I wasn't about to slap down some $300 so that I could build out a machine purely to satisfy my curiosity.

That changed when Patriot sent me some of its Viper White LED memory alongside its Viper V570 gaming mouse a while back. A pair of 8-GB sticks transferring data at up to 3600 MT/s was a fine match for that Ryzen APU, at least on paper. The pieces were coming together: I had suitable storage on the shelf, an overkill power supply, and an excess of cases to choose from stacked up in the closet.

Image: Gigabyte

All I needed was the motherboard. A cursory glance at Newegg listings told me that I could find a suitable foundation for under $100 in Gigabyte's GA-AB350M-Gaming 3. That was the last gasp for my restraint.

Here's a table with the full specifications of the machine:

Component type Component name New/used?
CPU AMD Ryzen 3 2200G APU with
integrated Radeon Vega 8 graphics
RAM Patriot PVLW416G360C6K
2x8GB DDR4-3600 16-18-18-36
Motherboard Gigabyte GA-AB350M-Gaming 3 New
System storage Toshiba OCZ RD400 512GB Used
Power supply Corsair CX750M semi-modular Used
Chassis Cooler Master N200 Used
Operating system Windows 10 Pro x64 N/A

Make no mistake: aside from the motherboard, this machine was cobbled together from spare parts. As a result, this machine doesn't have a fancy name like Colton's "Gipsy Danger," nor is there a lot to say about my rationale behind the selection of the parts. I purchased the Cooler Master N200 a few years ago as an open-box impulse buy at Micro Center, and it's housed many builds since. The power supply came out of my Wintendo that I recently parted out and sold off. That's why it's gross overkill for this build.

Even still, I don't like paying for junk. That's why I picked out the AB350M-Gaming 3. I've had nothing but good experiences with Gigabyte boards, and Newegg assured me that this board would come flashed and ready for a Ryzen 2000-series chip—and it did. Not only that, but this board—despite its $75 price tag after rebate—has enough features that I wouldn't feel put out if I wanted to use it for a faster Ryzen CPU later. That's a real possibility, given the impressive performance of AMD's Pinnacle Ridge chips.

Simple and clean

When I first built the machine I just left wires going everywhere. It's not a demanding system, so it doesn't need much airflow, and I really never intended to leave it in the case for all that long. Even still, it admittedly looked terrible. In preparation for this article, the aforementioned friend who gave me the processor actually came over to re-do my wiring job so that it didn't look so trashy. So thanks for that, kiddo.

With that said, there really aren't many wires to manage. There are no SATA drives and no video card. The Corsair CX750M power supply is modular, too. In the end, the front-panel wires, the fan cables, and the two motherboard power cables are the only wires that required routing. My biggest complaint with the AB350M-Gaming 3 is probably that it only has three fan connectors. Consequently, I had to remove the 120-mm fan that Cooler Master includes with the N200 chassis, leaving behind only the two Corsair fans. That's not exactly a problem, though, because as I said, this machine needs very little airflow.

As I continue to build machines with M.2 SSDs, I love them more and more. Never mind the killer performance of Toshiba's RD400 NVMe SSD—what I really love about M.2 drives is the way they install directly onto the motherboard and don't require any extra cabling. I have similar sentiments about building systems that only rely on integrated graphics, although the performance trade-off in that case is usually much more severe. That's less the case here, though. I'll talk about that at length here in a bit.

The linchpin in this build is surely the fantastic DDR4-3600 memory sent over by Patriot. Second-generation Ryzen chips handle fast memory better than the first-generation, but I wasn't really surprised when the machine wouldn't boot with the RAM configured for 3600 MT/s. Testing the RAM in my buddy's Kaby Lake rig confirmed that it wasn't the RAM's fault—even the second-gen Ryzen IMC has trouble running 3600 MT/s RAM at its native speed. Installing it back into the Gigabyte-Ryzen machine, I enabled Patriot's XMP profile, and then simply toggled the memory multiplier to 32x instead of 36x. Lo and behold, it started right up. 3200 MT/s is still quite quick, so I'm not fussed.

The A-series badge is from this case's first-ever build.

So with minimal tweaking, I got the system set up and put Windows 10 on it. Having done this on several other machines in the few days before (using the same install medium), I was really impressed with the speed at which the Windows install proceeded. Windows Updates flew by in a flash, no doubt aided by my recent free bump to 100 Mbps download speed. Naturally, I installed Steam and 3DMark and began filling up the RD400 SSD with games in my quest to discover what exactly one can do on a Ryzen 3 2200G.